Search results

  1. Rranger

    Old Sangstercraft.

    Thanks Scott Danforth all fixed.
  2. Rranger

    Old Sangstercraft.

    Cabin cover plastic frame connector broke. Attaches frame piece over cabin in frame above windows. I attached two pics one is good the other is broken one. Two questions is the one in the Iboats link the correct replacement? And in second pic can see I got about 1/8th of an inch to work with to...
  3. Rranger

    Motor won’t shut off.

    Teasmark I believe I found my issue ground coming off the remote plug wasn’t hooked up. Got this off a guy what else will I find lol.
  4. Rranger

    Motor won’t shut off.

    Might need this dummied down a bit for me. I’ve attached a pic of the starting circuit. If u could please identify the cd module, cdm and wh connection? And do u happen to know what the tan and tan/white stripe wires coming off the male end of the electrical 8 prong plug at motor are for?
  5. Rranger

    Motor won’t shut off.

    1996 Mercury 125hp serial OGO86789 1)motor will not shutoff with key or kill switch. Is there wires I can use jumpers on or disconnect to kill the motor. 2) one pic has a brown wire and a brown/white stripe wire off the male end of the cable from the remote plugged in at the engine. I don’t see...
  6. Rranger

    Motor won’t shut off.

    1996 Mercury 125hp serial OGO86789 1)motor will not shutoff with key or kill switch. Os there wireS I can use jumpers on to kill? 2) one pic has a brown wire and a brown/white stripe wire off the male end of the cable from the remote plugged in at the engine. I don’t see anything to plug them...
  7. Rranger

    Shifting problem

    Racerone my bad, took cowling off looked good under. Did the neutral thing and and it’s all good. Shifts. Now adjust cables and should be good. Thanks to you and Chris1956.
  8. Rranger

    Shifting problem

    My problem is the shift mechanism on the side of the powerhead is not working. It doesn’t engage slides freely back and forth. It appears the lever coming off the mechanism, that attaches under the front of the powerhead above the cowling is not connected for some reason and that’s why I can’t...
  9. Rranger

    Shifting problem

    Took apart shifted the remote cable to forward same as outdrive put back together and powerhead is not shifting at all. Remote goes back and forth with very littls resistance. So when my remote cable is off the shifter I should be able to shift on the side of the power head or not?. Right now I...
  10. Rranger

    Shifting problem

    R I was wondering that. I should add there is a Bay leg extension kit between the drive and powerhead. Maybe got wrong shift shaft extension? Will be dropping lower unit today. I should also mention shifter control was in neutral and gearcase in forward gear the last time I put it together so...
  11. Rranger

    Shifting problem

    I’m going to guess I have to pull the drive and make sure the outdrive and power head are in the same gear? And what would be the procedure to get them in the same gear.?
  12. Rranger

    Shifting problem

    1994 Mercury 125hp. Got around to setting up throttle and shifting cable today. when I started it it it was in gear even though remote said different. So I took cable off and when moving the shifter on motor there is no resistance moving it back and forth nothing engages or disengages. It slider...
  13. Rranger

    Water under front of power head

    All good took it a part and made sure water tube extension got hooked up and no more problem,.
  14. Rranger

    Wiring issues

    Thanks again will be ordering the harness.
  15. Rranger

    Wiring issues

    Again thanks for the trim sender tip.
  16. Rranger

    Water under front of power head

    Thanks racerone. That's probably my problem. Will update after I drop the drive.
  17. Rranger

    Wiring issues

    Cant seem to find anyt5hing for the powerob tec remote on the internet. I guess I use mercury wiring diagrams. I appreciate the info I'd like to get a tach hooked up and the oil injection alarm for sure. is the trim sender for another location for a trim control thanks.
  18. Rranger

    Water under front of power head

    Have a 1994 Merc 125 HP. Put a leg extension kit on a while back and started for the first time since I installed the kit. While running the pee hole flow was great, but a huge amount of water was coming out below the front of the powerhead. I'm thinking the water tube from the drive to the...
  19. Rranger

    Wiring issues

    Some questions. I bought a Powerob tec remote f9r my 1994 125 Hp mercury outboard. The remote has a five prong female plug on it assuming for a pigtail to the gauges. Anyone know where I can buy one link would be great. Also coming off remote a blue with white line wire, a red wire a brown wire...
  20. Rranger

    Gelcoat

    Did the roll on unwaxed coat and then a waxed coat today. if I decide to do another waxed layer tomorrow, do I really need to sand? Or wipe with acetone and roll it on? If someone also wouldn’t mind advising start with what grit and end with what grit to finish? Then buff? Then wax?
Top