Search results

  1. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    I have seen those too but with a wire thru the plug attached to the faceplate so you don't lose it as easily as I probably would.
  2. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    Somewhere like 6 and 9 worked for me. 3 and 6 would do the job but I wanted more hull contact. In addition I had alot of thru bottom of my hull screws that went clear thru from the prior owner. They were filled with pb like you did and I carried the glass over them. On another note I reglassed...
  3. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    Oh... lol... Maybe in batches to final. Forgot about that. Yup just check for hairline cracks/fractures.. Might have to redo. Been there done that. If its too deep or wide for the fill then you get the heat. If you have fractures then knock it out and fill back in layers not as deep. Ohhh the...
  4. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    Like this, pretty generic, Iboats sells themm too. https://www.ebay.com/itm/Bilge-Drain-Plug-Stainless-Steel-Waste-Water-Outlet-Boat-BDP1/273188913637
  5. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    I'd have to go back and look what I used. Mine unscrews to let water out but it stays in place and doesn't come out unless I use add'l turns for such. Also chrome or stainless with rubber O rings that can get replaced. On another note because of it being stainless you need to drive 1 bolt thru...
  6. kcassells

    1987 Larson DC-215 restoration

    Yup same here! Looking good!
  7. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    For the fillets you can also keep a spoon handy to smooth out everything. For you transom bilge drain fill solid with hairy pb. and flush. look into bilge drain examples you may use. Eventually you drill it out and install it. The bene is there is NO wood in contact with water when stern is...
  8. kcassells

    Just acquired a 170 Horizon. Assembly required.

    Awesome!
  9. kcassells

    1986 Brougham Bridger Yukon Delta Fishing boat renovation

    Looks nice. Sewing/cushions etc. look nice also.
  10. kcassells

    1986 Brougham Bridger Yukon Delta Fishing boat renovation

    Like that floor what is it?
  11. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Man o Man I butched up the teak yesterday for cut to fit with template. So PO so thar it is. No pics cause I'm scrambling to figga out how not to spend another 200 potatoes. Don't tell anyone Sam......Ahhhh!
  12. kcassells

    The Tin Mule Resto

    Cover your stuff and drop some of those bug bomb things you can get at Hdeblow.
  13. kcassells

    Free Boat, This thing is a badboy!

    I ended up having to get longer bolts also. I got mine off Ebayat the time.
  14. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Thanks for the info Sam. Were finding people at work with the "TRUST" factor not wearing any masks. Seems like were heading backwards. Anyway good to hear from you.
  15. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Bigger Better Hmmmm
  16. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    Sometimes I say the neighbors cat came by and pissed on my glass.
  17. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Worked a little more on the teak. Jined up the 2 pcs with a 45 cut. Roughed up and wetted out with acetone, applied epoxxxxyyy. Today I added the top pc. same procedure. I will make a template of where it goes and cut to fit. From there work edges etc to the final. Need to do the same for the...
  18. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    I think once you see how stupid dumb EEEpppoxxxy is you will never go back. :}
  19. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    Perfecto! period. It's a learning curve and with what I saw for your 1st laydown you are in the 99.99%. Try not to stretch out the glass too much cause you can lose the strength but it can be Worked. Second coat wet on wet is the shiss. I can say I ripped off some glass at times that got me mad.
  20. kcassells

    1981 Sportcraft 270 repair underway - transom, stringers, & repower

    1700 no csm, 1708 8oz. csm
Top