Search results

  1. alldodge

    1998 Merc 3.0l Front Engine mounting.

    What do you mean the "intake" and the pump does not suck it moves water
  2. alldodge

    Mercruiser 3.0L PowerTrim Cuts In At Speed

    Check your switch
  3. alldodge

    Starts dies blows fuse on take off

    Thanks Yes TKS carb, check the ignition fuse feeding the red/purple on the key switch
  4. alldodge

    Second Happiest Day . . .

    Congrats Looks like another guy that likes to splash crud up on his finders
  5. alldodge

    Alpha One Gen II loosing oil

    Yes, as shown in previous post, but thought you checked those?
  6. alldodge

    Alpha One Gen II loosing oil

    Guess it depends on how much. No one likes putting oil in the water but if your loosing a few ounces all season I would live with and recheck every year. If your loosing more, then might want to go for new seals
  7. alldodge

    Alpha One Gen II loosing oil

    Unable to answer why other then increasing pressure will help keep it sealed. Testing at 3 psi and rotating shafts "may" show something. A vacuum test may also
  8. alldodge

    Alpha One Gen II loosing oil

    I would think prop only becuse when its a very slow leak that is usually where it is.
  9. alldodge

    Bow stop vs bow roller

    Might be, but the stops work fine on light boats, not so good for heavy ones
  10. alldodge

    Overheating

    This is the best pic I can find The thermostat top looks OK but appears to be missing the other hose connection down lower which comes from the circulating water pup and would be a small hose The main circulating water pump hose (large) comes in from the bottom left middle, and exits far left...
  11. alldodge

    Inconsistent bogging/acceleration until it hit around 20mph - Mercruiser 5.7l

    If head was removed so was the distributor. Checking firing order should be done. Star at plug No 1 and the work clockwise to verify they are in the right order. Your No 1 on the dizzy may not be in same place as the pic Disconnect coil wire from coil and pull the kill switch (man...
  12. alldodge

    Seadoo GTI engine issue

    That would be my guess. Running a motor with out oil
  13. alldodge

    Seadoo GTI engine issue

    If I read your problem correctly, is the oil injection was deleted and its been running without premix. If so then the motor is where the problem will be
  14. alldodge

    Seadoo GTI engine issue

    Its probably already in bad shape, and not so much cylinders (damage there as well) but the bearings like the first one
  15. alldodge

    Bent the Reese forged trailer ball mount tongue

    Get a class IV mount
  16. alldodge

    Tahoe deckboat sink fuse is blowing

    If you have a switch on the sink to turn it ON like my Rinker, its just Hot and Ground. Hot is switched
  17. alldodge

    Tahoe deckboat sink fuse is blowing

    Could be, I would put a 10 amp because its easier to find What size fuse was in it?
  18. alldodge

    Starts dies blows fuse on take off

    That's not a Merc number. Look above the starter for a plate. It would be a number, letter, and 6 more numbers 0W123456 I think you have a TKS carb and the fuse blowing would be 20 amp. The temp switch is seen in the pic, and is probably shorted. It might even have blown the ignition fuse...
  19. alldodge

    Overheating

    The one coming from (flow toward) the water pump should go to the thermostat. If it did go to the water pump this would help flow into the block. With it going toward the mans reduces the flow into the block. What does the thermostat housing look like?
  20. alldodge

    Starts dies blows fuse on take off

    What is the motor serial number?
Top