Search results

  1. alldodge

    Distributor problems

    There is a nice on at ship wreck salvage but How about this one https://www.ebay.com/itm/303355351048
  2. alldodge

    1990 omc cobra 4.3 won’t rev above 2500

    Howdy Is your Tach accurate? Can the boat get on plane?
  3. alldodge

    Faulty sending/sensors?

    My guess is your running hot, you should be lower then 175* What is your motor serial number and are you closed cool?
  4. alldodge

    Power Steering Pump Mounting?

    Not all were serpentine https://www.mercruiserparts.com/bam/subassembly/31863/1939/240
  5. alldodge

    Mercruiser 3.0 rough idle at start and stumbles momentarily during acceleration

    Rochester 2GC is a good carb and use to be on the Merc motors.
  6. alldodge

    Shorepower fuse?

    ^^Agree
  7. alldodge

    Power Steering Pump Mounting?

    Most newer ones I've seen are above ALT on port side
  8. alldodge

    4 blade prop

    Get a new Tach because your motor is not turning that fast. Going from a 3 blade to a 4 blade with the same pitch your going to drop RPM around 200
  9. alldodge

    Power Steering Pump Mounting?

    The pump is a hydraulic pump and can be mounted anywhere you want to place it, so long as its not upside down or side ways :D
  10. alldodge

    Mercruiser Alpha 1 G2 Trim (probably dumb questions!)

    Could be a pump problem but I would look at the cylinders first because Like most, folks raise the drive till it stops. If folks would bump the down after it stopped going up, this would release the pressure and ease the seals Pressure is higher going up and less for going down
  11. alldodge

    Mercruiser 3.0 rough idle at start and stumbles momentarily during acceleration

    807504A1 is a Merc carb
  12. alldodge

    1999 Mercruiser 5.7 TBI hesitates but does open up

    Start by checking fuel pressure 30 psi at 1800 RPM Turn key ON and measure voltage at TPS to see if it smoothly changes value as the TB is opened
  13. alldodge

    Mercruiser 3.0 rough idle at start and stumbles momentarily during acceleration

    Haven't bought a carb in many years, I would just search for "Mercruiser TKS" or search by part number 8M0084193 to see what shows up
  14. alldodge

    Need bottom paint removal help

    Pay to have it removed, I did Paid to have mine removed down to the gel. Some spots it was removed to the glass. I then painted 4 coats of Interlux Performance VC which is epoxy. You could use stripper but it will take a few coats and probably still need to sand
  15. alldodge

    2003 4.3L warning alarm horn TB-V alpha

    Look at the color of the wire
  16. alldodge

    Help me be the hero :-), Mercury 4.3 – no spark

    Here is a meter for $7 That should be cheap enough right? https://www.harborfreight.com/7-function-digital-multimeter-63759.html
  17. alldodge

    bottom painting

    Having never been painted it will need to be sanded, 2 coats barrier and 2 coat bottom paint at a minimum. Depends on what paint will be used because premium paint cost more Barrier around $50 gal Ablative around $230 gal For a 18 footer I would say first time $800 to $1000
  18. alldodge

    Fix hull damage.

    Yes, they can be fixed, its just fiberglass and Gelcoat
  19. alldodge

    Transom repair?

    Agree, tearing all that out will be messy and expensive. Even more so if your paying to have it done
  20. alldodge

    Fix hull damage.

    If your doing all the work my guess is you will have $4000 in it it just the deck and hull work. Not counting the motor and drive
Top