Search results

  1. Faztbullet

    OMS help needed

    A click you hear every 20-45 seconds is the diaphragm piston being released in pump. Totally normal. What I hear in video is a steady rapid clicking like upper or lower bearing. I have seen several of these motors with the lower ball retainers in bearing fail and cause similar noise ,but when...
  2. Faztbullet

    Customer advice

    A .030 piston wont run in a 3.128 bore or (3.228 if typo). Max is 3.220. Hone em slap some Seizeco pistons in it and fix cooling problem, because that is likely what caused it to fail before and be rebuilt. If you use Seizecos make sure your run them thru several heat cycles before returning to...
  3. Faztbullet

    1998 Johnson 175 Ficht Not Starting

    Throw that Selco book away as its wrong. Those tests are for a carb motor!!! Also your stator is a 3 phase stator and does not have a org/org-blk wire. So are you sure its a FICHT? The only org and blk wire coming from flywheel cover is the CPS
  4. Faztbullet

    Customer advice

    OEM and aftermarket pistons are not knurled ! If you find a knurled piston in a 2 stroke outboard it was done as a band aid repair
  5. Faztbullet

    1980 Mercury 150 V6 Fuel Issues

    Check the restrictors to see if they are stopped up. Use a pair of long tipped needle nose and pull hose off valve while engine is running. Fuel mist should spray out like hair spray from a can. If its looks lumpy or dribbles valve needs cleaning or replaced. There is a bleed line routing...
  6. Faztbullet

    1980 Mercury 150 V6 Fuel Issues

    Nope
  7. Faztbullet

    Customer advice

    Nope
  8. Faztbullet

    1980 Mercury 150 V6 Fuel Issues

    Recirculation valves could be stopped up, will cause it to load up at idle
  9. Faztbullet

    Customer advice

    Top piston is stamped .030
  10. Faztbullet

    Customer advice

    It will have to go .040 or resleeve as top cylinder already .030 oversize
  11. Faztbullet

    1980 Mercury 150 V6 Fuel Issues

    Sent you link....
  12. Faztbullet

    97 150 Looper Fuel Spit-Back

    Vapor pump is not connected to carbs
  13. Faztbullet

    XR2 Spark plug question

    First PM item to do is float test the idle stabilizer if someone has not already done so
  14. Faztbullet

    1987 Merc 200 V6 blowing fuse

    Could be oil injection module if injection is still in use
  15. Faztbullet

    Can anyone tell me the name of this part?

    Need to test compression before spending time and $$ looking /buying parts. That a BAD overheat as head has changed color
  16. Faztbullet

    Swapping stators from 1991 150 over to a 1987, 200

    Nope as both are balanced
  17. Faztbullet

    Swapping stators from 1991 150 over to a 1987, 200

    It will work just need to order the dual rectifier kit as the 150 is 40 amp stator. 194-8736K1 40 Amp Regulator Kit Electronics
  18. Faztbullet

    Why is my System Check alarm sounding?

    The original System check tach units are know for problems
  19. Faztbullet

    Tilt and Trim 150hp Mercury v6

    System is self bleeding.....add fluid, cycle several time them SLOWLY open fill port in full up position, not the manual release
  20. Faztbullet

    '85 50HP 2-Stroke - runs poor with wrap-around cowl on

    Check for leakage around top motor mounts
Top