Search results

  1. alldodge

    93 rinker 202 cuddy

    The 4.3 doesn't bother me but the Yam outdrive would have me walk away, but that's just me maybe
  2. alldodge

    First time pulling a riser with questions about condition w pics

    Diesel works good for cleaning arrestor
  3. alldodge

    Volvo Penta GXi-E Low Power and 2 DTCs

    I don't see them as being disabled (OFF-not active), they are just not reading a fault (ON-active). The MEFI is either OFF or ON and does it that way. The fault can be disabled by turning the flag OFF using SW like MEFIburn (I have the SW)
  4. alldodge

    Hydrolock, swim platform, riser height and static water line question

    If the riser gaskets are leaking you would be able to see a path on the gasket where its not sealing. As Lou said may also see rust I'm seeing more weight is probably the issue. Kids growing up, and could also be the boat is soaking up some water along with the chop. Happen to see water on...
  5. alldodge

    Hydrolock, swim platform, riser height and static water line question

    Don't see your issue has anything to do with water in the cylinders. If it ever hydrolocked (running) it would be rebuild time What motor is it? GL, Gi, other, serial number would be great
  6. alldodge

    Volvo Penta GXi-E Low Power and 2 DTCs

    Its a VP with S/N 4012107862 GXI manual and the chart I have both list 50-60 psi fuel pressure
  7. alldodge

    Are Ocean X drivers a good choice

    No expert - From what I read the X drives are DPX drives with more corrosion prevention.
  8. alldodge

    Winterizing 350 mag?

    If all the water is out, AF can be sucked in. The issue is the pumps don't suck very much at all, so there is a possiablility the impeller could be damaged doing it. Could use a pump, like maybe sump pump
  9. alldodge

    Problem with engine mount - how to remove?

    Do not raise the motor at ALL without removing the drive It may be ok to raise the motor that high without loosening the rear mounts, its not a bad idea to do so just because. Will not hurt, but may help
  10. alldodge

    Sea water pump

    This is what I use https://www.amazon.com/OEMTOOLS-27031-Pulley-Puller-Installer/dp/B0014WH9SY
  11. alldodge

    Sea water pump

    No, no, no Do not use that kind of puller, you need a power steering pulley puller Its used to remove and re-install There are better then the HF but this removes/installs by holding the senter of the pulley https://www.harborfreight.com/pulley-remover-and-installer-set-12-pc-63068.html
  12. alldodge

    Volvo Penta GXi-E Low Power and 2 DTCs

    Looking at Ted's readout the knock sensor is OFF, and no codes
  13. alldodge

    Flying during pandemic

    Have not gone anywhere in a year. I might be going overboard but we are still healthy. Have friends which have traveled (flown, drove) and some have no issues, other not so well Guess the question is how lucky are you at roulette ?
  14. alldodge

    Sea water pump

    Thanks I don't want to put other vendor links here, but enter "mercruiser gen 7 sea water pump rebuild kit" in google and it will come up with a list. There is a place called amarket and marine-496pump and couple others which have the kit The searay link you have also has the part number for...
  15. alldodge

    Sea water pump

    What is the motor serial number?
  16. alldodge

    Exhaust Bellows, Alpha 1 Gen 2

    There is no issue with just leaving it as-is. Replacing with a tube will have to more effect then the way it is now
  17. alldodge

    Volvo Penta GXi-E Low Power and 2 DTCs

    It should not drop below 55
  18. alldodge

    1998 VP 5.0Gi looses power, maybe in protection mode

    Yes the impeller can be changed with boat in the water. Don't know how low the boat sits in the water, but remove the hose coming from the drive and raise it up to stop the flow. The hose should be 1 1/4 ID hose (do verify) and can make up a plug out of a piece of 1 inch PVC and cap or similar...
  19. alldodge

    93 rinker 202 cuddy

    Used boats is all about how it was maintained and sounds like it was. It should be an I/O and would probably have a Merc 3.0 4 cyl. The asking price looks within range but would probably be a bit lower. Use nada to get the values.
  20. alldodge

    1979 Chrysler striper tri-hull rebuild

    Not sure if anyone hear has the measurement, but if unable to find, suggest trying FB. There is a group called "Chrysler the best outboard ever"
Top