Search results

  1. alldodge

    2001 MC 5.0 EFI Throttle Body-appear to be running rich. Trying to help a friend

    You need one of these (91-806901) to attach at the TB to measure fuel pressure
  2. alldodge

    Volvo Penta Fuel Issue

    Howdy The motor uses very little fuel on muffs, and builds more heat and has more vibration on the water. When the motor is being started power flows from the starter to the fuel pump relay thru a diode. Once the motor starts the alternator sends power to the fuel pump relay thru another...
  3. alldodge

    350 MPI Spark

    Sounds like your going to need a scanner to read codes. Your motor has the HVS distributor and right now I don't see an issue with spark. Bring the motor around to TDC on number 1 cylinder and check the location of the rotor to distributor location in pic below If this is correct, do a...
  4. alldodge

    Aq131a exhaust manifold

    The imgr link in first post works, the google doesn't Yes there should just be a plug (item 22) in there. Probably used for draining during winterization https://www.marinepartseurope.com/en/volvo-penta-explodedview-7744650-26-18786.aspx
  5. alldodge

    Volvo Penta wiring HELP PLEASE!!!!

    Being your GXI is newer, I would think you should have the 555 ECU which would have 3 rows of pins. Just incase you posting switched the counts, here is some from the Merc side. Don't know if VP used the 555 in your year but it might help. Wire color may be different
  6. alldodge

    Volvo Penta wiring HELP PLEASE!!!!

    All I'm seeing are two pin rows for GI and GS http://boatinfo.no/lib/volvo/manuals/ef_wiring.html#/12 The fuel pump is turned on by the ECU supplying a ground to the relay coil. The GXI fuse/relay panel This is all I have, hope you can figure it out
  7. alldodge

    5.0L EFI Question

    The one above shows the pink goes to the fuse. This is the whole thing but will probably be hard to read
  8. alldodge

    Throttle screw

    What carb do you have? If you don't know take a pic of the whole thing If its a Merc carb like the one below, as BT mentioned the 3 screws are loosened to adjust
  9. alldodge

    Logistics

    With all the problems folks are dealing with Harvey, all the very well intentioned people during what ever they can to help is so great to see and hear. The issue I see is the lack of logistics. Everyone is getting a truck load or more of stuff and heading down to Texas and hope also...
  10. alldodge

    Volvo Penta wiring HELP PLEASE!!!!

    Found this one some time ago and have it listed as the 4.3 GXI so it should work for the fuel pump. The pump wiring are the same for most the EFI models.
  11. alldodge

    Electric Crown Head issue

    You probably need to replace some hose, this is for foul oders seen on page 5 http://www.fondriest.com/pdf/Raritan_Crown_Head_Hi_Boy_Owners_Manual.pdf
  12. alldodge

    TKS Module Wiring

    Looks like Power Point didn't do to bad
  13. alldodge

    Throttle screw

    It might be bent but could also be just an optical illusion. The coke should move freely and when cold as the throttle is moved it should close. Move the throttle and see if the choke moves easy with your finger. If it does move freely but does not close when cold the choke pot needs to be...
  14. alldodge

    Throttle screw

    The closer of the choke plate is closed by the choke spring on the other side of the carb. The throttle control and idle cam (not really a cam on a boat carb). The two pieces come together at the top of the carb and are free to move independently. The choke is stopped by a tab which is also...
  15. alldodge

    Fuses

    Either inline or a multi holder link this one http://www.ebay.com/itm/Waterproof-marine-Sealed-fuse-holder-4-fuses-120-amp-kit-USA-made-/291076954623 Remove the fuse and splice in some wires coming out
  16. alldodge

    Help with Kohler 7.3E Generator

    My manual shows it to be connector J3
  17. alldodge

    1988 Merc 5.7L 350mag - Powering steering shaking the boat on moderate turns @ dock.

    Check to see if the slot on the tube is vertical (d) and nut (c) is tight
  18. alldodge

    2001 bass tracker Warning alarm problem

    I'm finding the serial number showing up as a 4 stroke EFI, but see no 2 stroker. In any case this is from the 4 stroke manual for continuous beep
  19. alldodge

    5.0L EFI Question

    Maybe, depends on how it was connected. Noid lights are LED's and have a + and - side. In any case, the Pink wires should have a constant 12V when key is ON.
  20. alldodge

    5.0L EFI Question

    The motors use the same Delphi ECU as the GM truck/autos but they are not programed the same. You cannot put one off a truck and have it work on the boat. Its very unusual for both ECU to do the same thing. They both supply spark but have no ground pulses going to the injectors. There is 12V...
Top