Search results

  1. metalchewy

    Random

    I know what you mean. Lost an umbrella rig with three of my favorite swimmers and two weighted spoons a couple months ago. Snagged trolling on a tree about 25 feet down. We could see them pulled the boat backwards with the rod all the way to the tree. Couldn't get them to come loose for the...
  2. metalchewy

    Random

  3. metalchewy

    Random

  4. metalchewy

    Random

    Here's my snap-on MT-460 just about a year ago when I installed new points in the dual-point in the Dart. That distributor is on the fritz again. Replaced the vacuum advance and leads this month. Put an HEI distributor in its place while I find the rest of the parts it needs.
  5. metalchewy

    Random

    I've still got quite the floppy selection, even windows 3.2, and 95 and NT, plus OS2 and Os2 Warp installs. About ready to ditch them. Old install CDs are next, for anything I no longer use. Or that I don't have an OS to run them on. The old supermac with a huge software set installed...
  6. metalchewy

    Building a fishing boat.

    @mr 88 your post prompted me to look at guage sets. Will plan in a 7 guage set for the dash we build. A lot of nice looking inexpensive sets out there with GPS speedometers..
  7. metalchewy

    Building a fishing boat.

    Thanks for the suggestion. The boat came without a dash or steering wheel. Looks like it was removed a long time ago. Have a wheel and linkage, throttle, wiring and switches for lighting, kill safety, etc that were in the boat we pulled the engine from. Planning for a couple of guages...
  8. metalchewy

    Building a fishing boat.

    Thank You, I appreciate the input. I actually have a Johnson 30, out of a 71 boat in my dad's shop a state away. It's the other option we have. I just need to get it here. Dad wants it gone, just need bring it back on my next trip up there. It's a lot heavier than the force in my garage...
  9. metalchewy

    Building a fishing boat.

    If the outer hull is down to bare metal down the rivets and seams, there are no issues applying gluvit to the exposed rivets and seams prior to painting an aluminim boat. Yes, if leaking, people usually apply it to the inside, but why not seal it where the water comes in, versus the inside...
  10. metalchewy

    Building a fishing boat.

    2 coats of rustolum topside enamel. Will be a good base for the white gatorglide. I know GG is expensive, but with the conditions at the lake, dropping 1-2 feet a week, with new rock hazards on every trip, it will be worth it. The unseen rocks cause worry. A lot of sunken boats out there...
  11. metalchewy

    Random

    Just a meme from someone who said they complained. But, it does give me a good idea for next year's decorations. 😈 👿
  12. metalchewy

    Random

  13. metalchewy

    Random

    For me lately. OMG, he spent more on paint than the boat cost... o_O
  14. metalchewy

    Random

    In that meme, My eyes saw the "F" is silent, didn't get it, and showed my wife. She laughed and said th "P" is silent and called me blind. Glasses are in the other room. Hehehe
  15. metalchewy

    Building a fishing boat.

    Since the last post, made a lot of progress. A whole Lotta sanding. Then applied gluvit down the seams and on every rivet. The next week, scuffed up the gluvit, etched, washed with simple green a couple of times and applied zinc chromate primer. Last few days, Scuffed up the primer and put...
  16. metalchewy

    Random

    Ran across this pic the other day on one of my Mopar forums. Thought I posted it here, but I guess I didn't. Perty ol waterwitch..
  17. metalchewy

    Building a fishing boat.

    Good progress on the seams today..
  18. metalchewy

    Nobody fishing?

    We trolled from Claville Bay (Lake Mead) where we launched from and stopped in Fire Bowl Cove for breakfast where we fished anchovies from the shore, the pic above. A few small bites, but nothing big enough to catch. Then went out in the middle of the cove and did some bait fishing with...
  19. metalchewy

    Nobody fishing?

  20. metalchewy

    Picked up a 1990 Force 50HP yesterday.

    I di I did pick it up alone once, to adjust it on the motor dolly. Paid for it later though. 😃
Top