Just google the o-ring specific size and there are many options with very fast and cheaper shipping ;) Do Not try to install a broken o ring - it really will not work and only frustrate the situation.
Walmart/Amazon/Haror Freight all carry multi bit tiny screwdriver set and good to have around ;) They work fine since there are no torque specs all screws just need to be tight.
Whats the minimum speed that the hull will remain planed out? There is a sweet spot that allows your boat to cruise along ...... weather/wind can be a factor.
Have you taken measurements prior to your trip?
A handheld GPS can do a good job while tracking your distance and speed. Work the...
They make swimming loot a lot more graceful then I can and great to watch now our rivers are somewhat full.............. https://i.ytimg.com/vi/2DIC216A108/maxresdefault.jpg
You have found a data plate....... there is a link in my signature to a Boat Specs link. You will need to know the length and a photo would help.
Use the link in my signature to find specs (since you have a serial number (which is prior to the HIN Hull Identification Number) it sounds like an...
I would suggest a brass wire brush since it does not react. Use the gluvit or coat it on the seams and rivets...... then use zinc chromate prep and then paint. Have fun!
Original manufacturers rarely keep parts for older models beyond 5-7 years. You might look into boat scrap yards (rare) or attempt a repair of what you have yourself or at a body shop.
I store mine out of the bottle in a large zip lock bag......... it's plastic with a single spring.......... keeping it in a zip lock cuts back on the smell and collected dust
Another way to chase that fault is use an old fashion timing light. You can use it to check which cylinder is not firing. As stated above - I bet you are on one cylinder. I had a similar situation on a V4 that dropped one cylinder and I could not achieve max rpm under load....... that turned...
Not too hard to do.
Use a sharp punch (start with a brass punch then move onto steel if needed) and work on the broken key. They are normally softer then the shaft bu just take your time an a few srong raps should drive it out..... IF you see any movement then with a small chiesal get under...
As a retired soldier.......... my heart went out to ALL of the people involved in the "dog and pony" show.
I can only fathom the amount of practice those military members did.
I do not miss parades, formations or drill and ceremony!
Well look at this which is from the link in my signature http://boatspecs.iboats.com/Hewes__Redfisher_16__2001/bp/66b129861
And the rule of thumb is 70-75 percent of the max power will still give you satisfaction for most activities
I don't see a problem unless you are going to be...
