Search results

  1. S

    Remote oil tank

    Not sure why it's there but you just cap it off.
  2. S

    1988 70hp vro throttle

    Either your throttle/shift cables are froze up or your timer plate is. Remove the cables from the engine and see if the cables move freely with the control box. Post your results. Motor looks like it needs lots of work. Post a picture of your entire outboard.
  3. S

    1988 70hp vro throttle

    Is the throttle cable on or off the motor
  4. S

    1967 Johnson 100 hp Meteor outboard

    Eventually, but I'd just run it until it does.
  5. S

    Remote oil tank

    There's only one hose coming off the oil tank that I know of....post a picture.
  6. S

    1976 Evinrude 35

    Was wondering if I take the flywheel and coils off from under my 1985 30 horse, the CDI unit and the wiring harness and it might all work. But maybe it doesn't work that way
  7. S

    1976 Evinrude 35

    Can this motor be adapted to a CDI 2 easily? Another words get rid of the points?
  8. S

    Make model identification help

    Better pictures will help us determine a closer date.
  9. S

    Help with replacing gaskets

    I agree with Race....could be unburnt fuel and water. I put it on a vacuum for 10 minutes at 12 lbs. Vacuum tool screws into the oil drain port.
  10. S

    Evinrude 15hp remote conversion problems.

    These are the simplest control boxes they made. Throttle and shifter only. https://www.ebay.com/itm/336069976446
  11. S

    1971 25 hp evinrude outboard issue,

    Yes it's low. Enrichen the idle mixture screw a quarter turn cc and see if that helps.
  12. S

    2005 J115PLSOR weird oil leak

    You need those special nylon ties....the ones that are more rounded. It won't come off again. I'm pretty sure Racer mentioned that.
  13. S

    2005 J115PLSOR weird oil leak

    If that crank seal was bad you'd have running issues. I think you need to go run that motor hard somewhere. Burn it out.
  14. S

    Johnson 88 SPL identification

    1991
  15. S

    1974 Evinrude 115 hp 2 stroke

    This is the part number that you can research with. Lots online. 0172655 - Pump & Motor Assembly (172655)
  16. S

    1974 Evinrude 115 hp 2 stroke

    Here is nos on the motor....I'd write them to confirm but it looks correct. https://www.ebay.com/itm/395961840881
  17. S

    warning horn operation

    Agreed, that was your problem.
  18. S

    Where does the hose go?

    I'm thinking he wants to know where the other end is...I'm guessing anyways.
  19. S

    Rope Stuck on Evinrude 6HP outboard

    Your favorite penetrant, light taps from a hammer on a 2 by 2. I've had many go on to run years.
  20. S

    Best Practices For Throttle and Trim management to not blow a motor

    Start with the motor all the way down, give the throttle everything she's got and then start trimming up until you hear the prop cavitate and put it slightly back down. That's how you test for the right prop, your boat should be loaded and trimmed all the way up slightly under cavitation and...
Top