Search results

  1. tpenfield

    99 Monterey 276 Transom Replacement

    Probably a 1/4" drill from the inside near the leaking area and a few places higher. Go about 1" deep (the transom is 2" thick). Take pictures and save samples of the shavings, noting if the are wet, dark, mushy, etc.
  2. tpenfield

    1987 Cruisers, inc - Roque 287S

    Greetings and welcome to iBoats . . . Owner's Manuals for boat were not really a thing until lately. Mostly stuff about navigation rules. There is a fairly active Owner's group on FB and you could reach out to Cruisers Customer Service for guidance. I do see that there is a 90-page manual...
  3. tpenfield

    99 Monterey 276 Transom Replacement

    It could be just an assumption, so it needs to be verified before putting money and effort into it. it might be good to get the boat out of the water and take some core samples of the transom, both near the leak and elsewhere
  4. tpenfield

    What would cause staining under sunpad?

    Sort of looks like mold. Who says that boat manufacturers use Marine Grade plywood ??? :unsure: :LOL:
  5. tpenfield

    A couple basic testing questions

    It is hard to compare with the compression tests of others, because the methods of others and their 'pulling strength' varies, as well as the accuracy of the gauges. Therefore, if you are using reasonable methods of static compression testing take the highest value and call it good.
  6. tpenfield

    A couple basic testing questions

    what do you get if you spin the flywheel with the drill on high range? You do need a few compression cycles to fully pressurize the test gauge & hose. So, you could go with the 70# number. It is just a matter of consistency.
  7. tpenfield

    2002 Glastron 175sx milky oil

    It would be nice to see the oil that you took out of the engine. After you run the boat, it would be good to remove the spark plugs to see if you are getting any water in the cylinders. The battery may be bad, so see about getting a new battery.
  8. tpenfield

    Towing a Chaparral 23 H2o Sport boat with a 4Runner that has a 5,000 pound tow rating

    As stated, you will probably be in the 5,500 - 6,000 range for your actual towing weight. I've towed over the weight rating, but don't tell anybody. :LOL: That tow rating seems pretty low for a 4Runner . . . 7K of towing capability would be better.
  9. tpenfield

    Water Pump connections

    Those are the Whale Quick Connect fittings . . . https://www.whalepumps.com/rv/plumbing.aspx They use the water (liquid) pressure to hold them tight . . . provided that they are inserted into the fitting properly.
  10. tpenfield

    99 Monterey 276 Transom Replacement

    Bummer . . . oh and welcome to iBoats. We are here to help. Many of us us fixed transom and structural rot ourselves, because we are not made of $$$$$. Anyway, $20 K is a bit pricey, but figure $2K just to take the engines out and $2K to put them back in. Usually the rot goes further than...
  11. tpenfield

    Four Winns hull strength

    As Scott so colorfully indicated . . . boats will typically take a lot more pounding than the people on them. So, you will give up long before the boat does. Since you are talking about a fairly new boat, you also have far less to be concerned about with structural rot issues, which can result...
  12. tpenfield

    KIA Telluride for towing?

    Guys . . . Let's not escalate this thread into heated discussion, and do keep the OP's purpose in mind.
  13. tpenfield

    Register Homemade boat in WI

    Check with the Wisconsin DNR . . . it appears that the state will assign you a HIN . . . the Pre-fix will be "WSZ"
  14. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    The car has right around 54K miles Many of the fault codes were 6-8K miles ago, but they don't seem to go away with the code clearing function. I think the tech stuff has gotten ahead of the ability to service in some regards, and the results is the 'parts cannon'.
  15. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    I know . . . that must be where the advice of "take it to a qualified mechanic" come is to play . . . :ROFLMAO:
  16. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Well to my initial point, I am gaining a new appreciation for my techy boat engines, as compared to the car techno-gadgetry
  17. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    As a sideline, I do get a kick out of folks on car repair forums who tell posters looking for insight and possible solutions for specific issues to "take their car to a qualified mechanic" . . . Really . . . you don't say ? Such brilliance. :ROFLMAO:
  18. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Today, I checked for a set of 'radiator shutters' . . . found them . . . right behind the kidney shaped front grill pieces. I had no idea of such a thing, but I guess cars have them now. The error code 138701 seems to indicate that the shutter opened too soon or too much, based on the...
  19. tpenfield

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Yes, my previous car was a 2006 Mercedes C230 . . . terrible in the snow. I kept it for 13 years and put about 150K miles on it. I tried to get a Mercedes Wagon, but everything on the CPO market was a dark color and I wanted a light color. So, I started looking at the BMW's . . . there...
  20. tpenfield

    New here looking for advice..

    the Formula website has 'vintage' brochures that you can download . . . Here is one from 1978. https://www.formulaboats.com/wp-content/uploads/2023/06/1978-Formula_Signa-Brochure.pdf A 1978 boat, being over 40 years old will need some inspection to determine if it is solid, or possibly has...
Top