Search results

  1. tpenfield

    My boat is being a boat . . .

    Yes, it does . . . BTW - I am on a couple Cruisers Yacht FB groups . . . There was recently some pictures of your boat (IIRC). . .
  2. tpenfield

    2008 Chaparral 275 SSI 8.1 Volvo Penta GXI-J Soft Alarm Issues

    Welcome to iBoats and sorry to hear about the engine alarms. The Rinda Diacom software will record the ECM data while you drive the boat. I usually do that when I get an issue, rather than replacing parts. Reviewing the data, and particularly over 3,000 RPM in your case, you should be able to...
  3. tpenfield

    My boat is being a boat . . .

    I guess it would make sense if during each outing the engine discharged about a half quart of coolant and did not retrieve it back. We shall see.
  4. tpenfield

    My boat is being a boat . . .

    Yup, I might order a couple new caps. I'm hoping to get some of the batteries out of the way with the LiFePO upgrade.
  5. tpenfield

    My boat is being a boat . . .

    Update . . . I spent some time out on the boat (at the mooring) today to take a further look at the cooling system. The starboard engine's reservoir was quite full, so not much, if any coolant got sucked back into the HE as the engine cooled down from last week's outing. . . So, I drained it...
  6. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Today's progress . . . I got the axle assembled. . . . 4.80 - 12 wheels The hubs have grease zerks on the back side, which is something I have not seen before, but makes sense. Next up is the new controls and cables for the outboard.
  7. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    When I was growing up, all the cool kids in the harbor had Whaler 13's w/ 40 HP. Talk about Greased lightning. o_O
  8. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Yup, the original 'unsinkable' foam filled design. This boat is a 1971 model, I believe. Probably has some saturated foam. Motor is appears to be 1980's, based on the model # (1983 ?). Overheat was mild and short lived. Probably should order the impeller. .
  9. tpenfield

    Showing the Boston Whaler 13 some TLC . . .

    Greetings, I have been procrastinating on keeping up with the Boston Whaler. It does not get used much and last season it overheated. I ran some de-scaler solution through the motor to see if that helped with the cooling system, and seems to have improved things. Keeping up with my...
  10. tpenfield

    Power steering leak

    Yes, see if it feels loose and be careful not to over tighten.
  11. tpenfield

    looking for customflex mallard saile

    According to the info on the Sailrite website it is a cuddy version of the Flying Scott https://www.sailrite.com/Customflex-Mallard-Sail-Data There is even sail data, but it looks like you may have to have one made.
  12. tpenfield

    A/C filter removal

    You could probably just loosen the hose clamps on both sides of the strainer. Take the whole strainer out and back flush it to remove any debris. Re-assemble.
  13. tpenfield

    Solenoid location

    Maybe zoom out a bit with the camera . . . But the slave solenoids were placed in the electrical box on the engine in some of the MPI engines.
  14. tpenfield

    Mercury merc 110 9.8hp motor

    Yup, I frequently search CL and FB for those motors . . . Any original decals are all faded and look more silver than the original colors.
  15. tpenfield

    Mercury merc 110 9.8hp motor

    Nate said in the initial post that the S/N is gone. Maybe the motor has a dark past :unsure:
  16. tpenfield

    Mercury merc 110 9.8hp motor

    Gummed up carburetor or the idle screw at the top of the carb just above the air intake might need a tweak. (Assuming it is the Tillotson carb)
  17. tpenfield

    Slow trim response

    One thing to check is if you raise the outdrive about half way . . . maybe a bit more. See if it will stay there for several days. If it slowly lowers, you may have a problem with the valves in the pump.
  18. tpenfield

    Mercury merc 110 9.8hp motor

    Cowling graphics look mid-1970's. 1976-77 ish.
  19. tpenfield

    How to pressure test a 4.3 l mercruiser

    Post the serial number to your engine, as the cooling systems do vary a bit. A few pictures of the engine would be good to see as well. Also decide If you want/need to include the exhaust manifolds in the test, or if it is just the engine block. Tell us a bit of background that is leading you...
  20. tpenfield

    Seats

    Perhaps they got thrown away with the restoration debris, but keep looking. Options would be to: 1) find another Bayliner 2152 in a salvage yard, or 2) make new seats. If they are just the seat bases (not the backrests) it should be fairly easy to fabricate a base. If you are going to get...
Top