Search results

  1. flyingscott

    Fuel restriction alarm

    Those sensors in the pump can go bad. There is a replacement sensor but I don't remember the #
  2. flyingscott

    Fuel restriction alarm

    Why not? Do you know how a VRO tank works?
  3. flyingscott

    1990 90 hp Mercury. Beeping when key turned on.

    Those are notorious for the sensor in the tank failing. Unplug the sensor wires and see if the beeping goes away. Run on premix until positive the oil injection is working. And get the carbs cleaned before anything else. Those motors do not have a history of oil injection failure.
  4. flyingscott

    Remove midsection

    If it's the exhaust plate on the side of the power head it may come off by just taking the bolts out. If it's the gasket under the power head you have to pull the power head off.
  5. flyingscott

    1994 Mariner 60hp

    How is a 06159317 serial # a 1994? For the last time put a pic up. You have 5 posts on this motor. Why are you trolling? Several times asked for pics.
  6. flyingscott

    2000 Mercury 90hp 4 stroke pro series

    You will hear it called making oil. The motor runs to cold and can't burn off the condensation. All that excess ends up in the oil pan and Yamahas seem more prone to that. So before anything check your thermostats.
  7. flyingscott

    Evinrude fuel pump conversion kit

    They make a replacement VRO style pump that does not have oil injection for around $160. Sorry I don't remember the part #.
  8. flyingscott

    1958 Mercury Mark 28

    If that is a 28A you HAVE to buy the manual to change the impeller. Also special tools needed. This site has everything you need. http://www.johnsmcintoshvintagemercuryoutboard.com/
  9. flyingscott

    69 and up 25hp - a good choice ?

    They are good motors. Lower unit is the weak spot on them. Either get it for a good price or test drive it
  10. flyingscott

    60 Mariner----Help??

    Sorry you have 3 posts on this motor
  11. flyingscott

    60 Mariner----Help??

    Why do you have 2 posts on this motor? Put up a pic!
  12. flyingscott

    60 Mariner ---Help???

    We need a pic to be sure? Or does it say made in Japan on it? Or is it 2 or 3 cylinders?
  13. flyingscott

    60 Mariner ---Help???

    Not so sure about that.
  14. flyingscott

    60 Mariner ---Help???

    Wouldn't an 83 60 hp mariner be a Yamaha motor.
  15. flyingscott

    60 Mariner ---Help???

    Put up a pic of it
  16. flyingscott

    Johnson V4 Crossflow Throttle return

    What is your idle speed?
  17. flyingscott

    Johnson V4 Crossflow Throttle return

    Have you adjusted your throttle cable? What is you idle speed?
  18. flyingscott

    Yamaha 200ETXN Surging Idle

    That could be the updated version. Get the factory manual
  19. flyingscott

    Yamaha 200ETXN Surging Idle

    You need an open air spark tester also. Spark needs to jump a minimum of 7/16". Without a manual to tell you what the specs are your DVA test may be useless.
  20. flyingscott

    Yamaha 200ETXN Surging Idle

    You need a factory manual for the motor so you have the correct specs. You also need a DVA adaptor.
Top