Search results

  1. matt167

    Too windy?

    I've been out on a 24' boat on Lake Ontario where it was very windy and waves were running 3-5' with a small craft advisory. One boat had went down that day, and we saw some of the wreckage... Fished all day with the waves and it was not a bad day at all... BUT that is not something I would do...
  2. matt167

    Help omc seadrive trim issues!

    If there are no leaks, the cylinders are probably leaking internally, or a valve is bypassing in the trim pump.. Unless it's really bad, I would just use a transom saver to hold up the motor and finish out the season. have the system serviced in the off season. The system could entirely fail and...
  3. matt167

    V drive noise

    Well, you've got twin engines, so at least you'll make it home... That sounds ugly I'd find an RV-50 that matches the other one. I know nothing about V drives except it shouldn't sound like that. That's bearings and gears eating themselves
  4. matt167

    Carb selection for '94 OMC king cobra

    whatever you choose needs to be marine compliant. 750 CFM if it's a stockish build
  5. matt167

    1969 Glassmaster 17' trihull

    It's the old 3.8L/ 225. The same design team that built the 215 Aluminum block V8 did the V6 IIRC and some of the tooling is the same. Being a 1969 boat, the motor would have been aquired from Kaiser who bought the rights and tooling to put them in Jeeps and other industrial applications in...
  6. matt167

    Carb cleaner

    Run a 2 stroke lean at 10,000 RPM's and see what happens. The stuff works ok on a lawnmower. It can save a carb that is slightly gummed up if you can still get some flow through the main jet, it'll clean it up. But I would never try it on a 2 stroke or any other high revving engine. You'll be...
  7. matt167

    Info on Mercruiser 0A494867 170Hp engine.

    Iron block GM 4.3L V6. similar hp, much better reliability
  8. matt167

    91' 25 HP Evinrude noise supressor (air box)

    I have a '88 or so 20hp. No silencer/ air box, but there are holes for them
  9. matt167

    Info on Mercruiser 0A494867 170Hp engine.

    If the boat is nice, and the engine runs good, it's worth it. 4.3L replaced the 3.7L and is what the boat would have come with if it were built after 1990 A good tune up wouldn't hurt it if it runs and does not overheat... The cooling system on a 3.7L needs to be kept up to 100% all the time...
  10. matt167

    Info on Mercruiser 0A494867 170Hp engine.

    Yes, it is an alternator, but not in the traditional sense, which is why he couldn't locate it
  11. matt167

    Info on Mercruiser 0A494867 170Hp engine.

    It's not really an alternator on that engine. It is but it isn't. It's basically an outboard stator on the front of the engine. There are alternator kits for it as it's really horrible the way they came from the factory
  12. matt167

    boat project: 1969 glassmaster 17' trihull identification of engine

    Floor needs replaced on a boat with NLA parts makes it Not worth it.. rotted floor is rotted boat. Dumpster filler
  13. matt167

    boat project: 1969 glassmaster 17' trihull identification of engine

    That's an OMC 3.8L which is a Buick motor IIRC... Total money pit. Everything there is NLA.
  14. matt167

    Trailer tires dryrotting again

    Well, beads are ~ok~, we have them at my shop for an as needed basis. If you put those cheap tires on a balancer, you'll find they are out of round, terrible runout and would take a bunch of weight to balance traditionally. You won't notice as much harmonics on a truck as you will a car.. We...
  15. matt167

    Just bought a my first boat. Need some help!

    Ethanol free if you can. 91 octane or better.
  16. matt167

    Steering conversion

    Well, they are partly right, as converting the motor to remote controls will be a chore, BUT, finding the stick steering lever and any mounting hardware should be right off their shelves. The Craig Cats have not changed much over the years
  17. matt167

    After market carb kits

    I was forced to buy chinese kits for my Honda CB 500 Four as Kehin and Honda both stopped making kits . The brass bits are junk. 2 gaskets and the needle valves are all that I could use.
  18. matt167

    Steering conversion

    more modern cats are stick steering. Contact the company, they can probably get you a conversion kit of sorts
  19. matt167

    Boat and trailer Registration NY

    hommade trailer isn't a big deal in NY. DMV office will know what to do. They are common as titled trailers
  20. matt167

    Trailer tires dryrotting again

    I don't think this analogy makes any sense when you put it into the tire world. You can find a 17" car tire for $40, but it's not going to last, it's not going to balance well. Just look at the traction ratings on that tire. It might be branded something like Westlake, Nika or Waterfall.. I...
Top