Search results

  1. matt167

    2001 Mercury 125hp saltwater start off boat?

    Just got this off a customer for $150. he swapped a 4 stroke on his boat, knew I was building a boat and wanted to contribute.. I have not heard it run but it's never seen saltwater and I know it runs. It was on the back of his boat and in use until yesterday.. can I start it on a stand to fog...
  2. matt167

    1971 Mercruiser gimbal bellhousing reinstall

    I bought this SC Offshore 18 with the gimbal bellhousing off. The guy had just replaced the bearing and bellows when he found a 191 Islander. The housing is ready to be installed with new hinge pins having new bellows and everything n I have a 2000 Alpha gen 2 assembly on the junker boat to...
  3. matt167

    1971 vs 1972- later sterndrive?

    Got a '71 Starcraft Offshore V 18 with Mercruiser 120hp and just wondering what the difference in drives are, should the lower unit ever need replaced. I know SEI says 1973 and later in order description, but then shows 1972 in the application list... Will an SEI 106 or any later drive work? I...
  4. matt167

    Joined the Starmada. kind of unexpectedly

    Well. Smokercraft that I got free will be getting the chainsaw treatment. Once I pull some good stuff out of it. Steering box, gauges and, and the vortech heads/ intake and transom assembly. Probably grab the nice Taylor Made windshield as well. As to the Story, I have seen this boat a few...
  5. matt167

    I/O to outboard with boat with swim platform?

    How difficult would a transom pod be for this boat? I might be using this hull for my 'chugger' build. But it would need outboard converted. I have a 2001 150 Merc lined up to buy cheap. The boat is a 2000 Smokercraft Allante 196 and yes the bunks are collapsed
  6. matt167

    disposing of a hull/ what's worth saving?

    I just picked up a free boat from a customer today. It's not really worth bringing back and I don't have the title anyway. It's about a 1999ish Smokercraft Allante 196. At one time was a nice boat last stickered in 2012. But someone has scavanged quite a bit. the leg is gone, exhaust manifolds...
  7. matt167

    What trailer will I need?

    I'm building a boat, which has a hull that resembles a Jon boat, except it's wider and built into a cabin cruiser. It will have a 65" beam at the water line and a 16' OAL. Someone I worked with asked how I'm going to transport it, which is easy. Trailer it. I looked for trailers and found it...
  8. matt167

    "Marine" vs "Deck" stainless steel screws?

    I need some screws for my boat build. I know I need brass/ bronze, Monel or stainless fasteners.. I've chosen screws because they will be easiest. 90% of holding will be construction adhesive ( PL Premium or Titebond III depending on area/ holding power needed ).. I can get 1lb boxes of #8 605...
  9. matt167

    Chugger boat finally starting construction

    I had to delay getting plywood for my boat due to selling my truck and daily driving my MGB. House needs a roof as well but I figured kill 2 birds with one stone and ordered 10 extra sheets of 1/2" CDX, and picked honey sheets out of the 70 sheets. I know it's not Meranti, Ockume or other "BS"...
  10. matt167

    Johnson 20-35hp cowl differences through the years?

    I've got this Johnson 20hp, think it's an '88 but might be '87. cosmetically identical. Runs great and cosmetics are good but I want brand new looking since it will be going on a brand new hand built plywood boat ( planning stages atm ) I really want to put 1995-1996 decals on it but I'm pretty...
  11. matt167

    johnson serial tag washed off?

    I just bought an at least '85 Johnson 20hp. I noticed the serial tag is blank. Not mechanically scraped but washed/ faded away. Is there any other way to check model number? I'd like to 25hp convert it if it can be done cheap enough. It has the 100:1 ratio decal if that makes a difference
  12. matt167

    Johnnyrude 25 2 strokes?

    I've been thinking hard about putting a brand new ~$5k motor on my little boat I'm building ( Suzuki DF30A is on my wishlist ). Being the boat is going to cost a bit to construct and I'd like to get it under power. I'm looking at used outboards to start it off and work kinks out of. Are the...
  13. matt167

    plywood species?

    I'm building a small outboard powered cabin cruiser. Flat bottom, curved bow, very simple ( roughly a Lewis boat works chugger design) in a 60" beam x 16' variation. I'm trying to source 3/8" doug fir plywood that is ACX or better without having to order it in from a website or get something...
  14. matt167

    Outboard HP requirement?

    I'm building a lengthened, widened, and 'cosmetically and structurally altered' version of the Lewis boat works Chugger. The flat bow is going away for a more traditional type bow found on a jon boat. It is also going to have a laminated transom with knees and stringers. 16' long, 60" beam I...
  15. matt167

    Building a tribute boat to my grandfathers 1963 Custom Craft Sea Ray

    I was in the process of restoring my grandfathers 1963 Custom Craft Sea Ray ( cap off, total rebuild ) when the building it was in collapsed last winter. My grandfather bought it new and gave it to me thinking it was ok, but he did not realize/ understand it needed a transom/ stringers/ floor (...
  16. matt167

    Solar small canal boat possible?

    My Custom Craft Sea ray, which was in the process of restoration was destroyed last year when the tent garage collapsed in a heavy snowfall while I was away. Sucks, but all that is savable is the engine and the rear fin section of the cap, which I will graft onto a T bucket when I build one at...
  17. matt167

    How to select correct SEI drive?

    My dad has a 1970 ( I think ) Starcraft Offshore V 18 with Mercruiser 125hp I/O. The out drive went bad 2 years ago. Last year he bought a rotted parts boat and swapped the out drive onto it. The outdrive lasted 2 outings before filling itself full of water. I don't know if he just replaced the...
  18. matt167

    Buying boat sight unseen?

    Well, MBS kicking in again, and I've been scanning Ebay and CL for inexpensive boats that won't take much to get running.. Found what I know is a Wellcraft V20 bowrider of an unknown year. It has a 165 Mercruiser 6cyl and has the old Mercruiser trim switches so it's mid-late 70's at best...
  19. matt167

    buying abandoned land?

    Have a good friend that wants to buy some land. 5-10 acres of anything that can be built on but she has very short money for it ( $1-2k per acre ) I know that nothing is going to be 'for sale' in her price range around here and have found some abandoned looking properties with fallen down...
  20. matt167

    New tow vehicle

    My '95 K1500 had some driveline issues. Binding in reverse, possibly trans, or other. Also had a frame that was getting bad and it was all pretty rusty.. Was eyeballing a 2003 1500 4x4 with the 5.3L with 110k and was a RCLB but it also had some rust showing that was waiting to come through and...
Top