Search results

  1. jerryjerry05

    Force 125 lacking power

    Try the starting fluid test around the port covers? You say you swapped coils?
  2. jerryjerry05

    1988 force Full throttle only 3500 rpm

    I'd start another thread??? Surge: floats need adjusting, the recirc system clogged?
  3. jerryjerry05

    Trim and tilt visible leaks

    Take your time, use a propane torch if needed then start looking for a replacement. I've not had much luck getting the trim unit apart without breaking at least 2 of the 5 screws :( Keep us posted, maybe a few pics as you progress?
  4. jerryjerry05

    Force 125 lacking power

    No spark on #2?? Try swapping the packs around and see if the no spark moves to #4??? Try swapping the coils around? The trigger leads are very thin and break under the shrink wrap, tug on them and see if one's loose??
  5. jerryjerry05

    1988 force Full throttle only 3500 rpm

    Puffit: if you've never touched the timing??? Now isn't the time. The timing won't jump or change unless you do something to change it.
  6. jerryjerry05

    Oil recirc lines diagrams?

    I believe it's a 97 30hp.The ID tag's long gone:( The bottom of the intake is a tiny hose barb, I think it's a recirc oil hose, maybe it's recirc fuel line? Anyone have a diagram for the hoses on this motor? Thanks
  7. jerryjerry05

    Engine conversion - Is it doable?

    Looks like he's running a single and putting twin anything would be a huge job!!! :) You'll need to do a lot of research as to what will bolt up to your drive. Or find a complete motor/drive system or change to Mercruiser.
  8. jerryjerry05

    Tilt Cylinders Leaking

    https://www.ebay.com/itm/Chrysler-Force-OEM-Tilt-Trailer-Bracket-Lock-Bar/303857338017?hash=item46bf4f06a1:g:rskAAOSwwwpgB5Z2 ebay # 303857338017 $80 You raise the motor,install the bracket and then lower the T@T to tighten up and stop the bounce
  9. jerryjerry05

    Thermostat chaos!!!

    The year could be a 1969? This might be the part# F528068 or 18-3559 You might try Franz Marine he seems to have the parts lists for the older Chrysler.
  10. jerryjerry05

    Question about gear ratio

    Any idea what year the new gear box is from? Always include the year, model and serial numbers on the motor and what ever your working with??? Need the year for better answers.
  11. jerryjerry05

    OMC Cobra 2.3 model number

    https://www.boats.net/catalog/omc/stern-drive/2-30-liter/232bmrmef-1989 Here's the parts diagrams. I'll send you a PM as this site sometimes doesn't like to put others links here.
  12. jerryjerry05

    Force 125 lacking power

    Just one bolt??? Man did you get lucky!!!! The exhaust plate: It's famous for breaking bolts and being a real pain to reseal. If possible try to get the surfaces milled so they match up. If not, use lots of sealer.
  13. jerryjerry05

    Points Conversion to CDI

    Some people are thieves!! Ebay's full of them. I've got a box of old/NEW Chrysler parts. I'll put them on Ebay and retire in a day or 2 :) Post a pic of the parts you need or a part# and I'll see if it's in my box of parts. IF?? I have them I'll let you have them for shipping and a...
  14. jerryjerry05

    Force 70Hp 1991 charging issues

    otboardignitiondotcom has test procedures for lots of motors. Always include the year, model when asking questions. I find I get better results when I use an analog meter not the digital you show. It's still early I'm sure someone else will have different answers. The OEM and aftermarket parts...
  15. jerryjerry05

    Points Conversion to CDI

    The stator would be part of the new system.
  16. jerryjerry05

    1989 force 85hp loss of power

    The backfire or cough is from an air leak somewhere?? Possibly at the port cover gasket? If it starts, do the starting fluid test. Can of SF sprayed around the intake side of the motor. The area under the coils/packs is part of the intake, so is the base of the motor under the carbs. If...
  17. jerryjerry05

    55 hp Chrysler. Model 5551 has 3 piston rings

    I've never done it but some of the guys on here have done it. U-tube video's by FrankA or Frank Amcophora Frank put out a few good video's on the repairs of Chrysler/Force.
  18. jerryjerry05

    Points Conversion to CDI

    They started using Prestolite Ignition system in 1987/88 Look around and find a junker and use the system off that motor. If my memory's right? you'll need to drill/tap the trigger base(maybe) or you might be able to use the parts from the other motor.
  19. jerryjerry05

    Part identification

    Not sure of the name?? It's part of the ignition system. If you change the stator the new system will take that part out. Sorry I can't give more info.
  20. jerryjerry05

    Need advise on bringing a 92 beretta succsess 200 back to life.

    To rebuild the upper gear case you will need special tools. You might be ok to just replace the bearing, You'll need to get the factory service manual to be sure.
Top