Search results

  1. Scott Danforth

    Mercruser 470/ 170 compatible parts

    agreed, they are popular on the HAMB. including running SOHC head.
  2. Scott Danforth

    Green people destroyed another fantastic fishing area.

    Zebra Muscles decimated the great lakes.
  3. Scott Danforth

    1991 Monterey W/Merc 3.0 Questions

    Thats an oildyne pump Pull the drive, you are supposed to every year anyway. Check bellows, gimbal bearing and alignment. Then split it on the tailgate of the truck Start at the exhaust elbows and work backwards to the raw water pump..... Backflushing as you go
  4. Scott Danforth

    4.3 LX water in the oil...

    with a milkshake in the oil. drain the antifreeze from the glycol side and pressure test. should hold 15 psi forever. test the anti-freeze you pull out with a refractometer. make sure it is good. my guess, with the antifreeze low, the coolant freeze point is way to high, so it froze.
  5. Scott Danforth

    1991 Monterey W/Merc 3.0 Questions

    1, there are a few types of reservoirs. if its an oildyne, the tank is held in place with a single screw from the bottom. if its a prestolite, its held in place from the top you have to back-flush the system from the manifolds to the thermostat housing, and from the thermostat housing to the...
  6. Scott Danforth

    Coolant Disappearing, need help

    Low hours just means it sat. In a boat, 50-100 hours a year is normal usage Now you start pressure testing components such as the heat exchanger, exhaust elbows, etc.
  7. Scott Danforth

    Sea Ray 1977 200SR

    The bilge venting is so you do not blow up Owners manuals did not exist back then You use an oil extractor pump and remove the oil from the dipstick Find your motor and drive service manuals here: https://outboardbooks.com/
  8. Scott Danforth

    1998 4.3 GL Head Replacement

    Verify it is a vortec head (8 intake bolts) Any 1996 - 2003 GM truck with a 4.3 V6 in your local salvage yard will have the same head. However you should look at the other head and block as well. The chances of just a single head being freeze damaged is extremely low
  9. Scott Danforth

    Coolant Disappearing, need help

    Fluid expansion when heated. When you key off, heat soak will force the coolant out somewhere Pressure test the cooling water system (after draining)
  10. Scott Danforth

    Alternator or switch?

    By a 12 volt reference signal from the key switch to the excite terminal. In a car, this is controlled by the BCM Dash light is the terminal next to the excite terminal
  11. Scott Danforth

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    for an SBF. about 3.25" below the oil pan flange (had to google that as it has been a long time since I played with a ford)
  12. Scott Danforth

    Alternator or switch?

    a 12 volt battery is dead at 12 volts, fully charged at 12.7. alternators charge between 13.4 and 14 volts. I think your $1 air core dash gauge is off.
  13. Scott Danforth

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    on an SBC, you are over filled if you are 1" below the oil pan lip. that means the crank is splashing in the oil creating foam
  14. Scott Danforth

    VP 3.0 stalling

    Pull the carb and clean it. Most likely the accelerator pump circuit is plugged
  15. Scott Danforth

    Which ECM

    Doubt it's the ECM. Check fuel pressure under load
  16. Scott Danforth

    LiFePO Batteries ???

    You spelled phuck'n wrong.... Sorry to hear about the alternator. Could just be a bad diode pack or regulator
  17. Scott Danforth

    Mechanical Safe Lock

    The 4 turns left are to reset all the discs. You are listening to click....click....click...click...squick..as the disc engages the next First one is easiest
  18. Scott Danforth

    Mechanical Safe Lock

    Use a stethoscope and turn slowly. We figured the combination to a safe my buddy bought.
  19. Scott Danforth

    Downsize Fuel Tank

    That's like cutting the roof off your car because you only drive it when it is sunny. As stated, you don't have to fill it up. BTW, add up the cost to remove your floor, buy a new tank, secure it, replace the floor...... Since you didn't want to spend a lot of money......
  20. Scott Danforth

    Gas electric generator issues

    im going to go with you put it away full of fuel and now need to go thru the whole fuel system from the tank to the carb. not idleing, or only running with the choke on is a plugged low-speed jet.
Top