Search results

  1. tpenfield

    I Didn't Pay My Bill . . .

    Web site hosting bill that is. . . As many of you may know, I have my own web site where I document my experiences on the boats that I had over the years. I also get email from the site. A few days ago, I started noticing that the email was no longer working and some of my picture links were...
  2. tpenfield

    Hurricances that backtrack . .

    I cannot remember when there have been hurricanes that have backtracked on themselves or just hung around, like what we have seen this year with Harvey and Jose. I'm was hoping Jose would be scooting east by now, but it looks like it is backtracing into Cape Cod. I have plans to go over to...
  3. tpenfield

    Super porpoise

    Maybe you can post a few pictures after you have a few more posts under your belt. It is basically a Sunfish clone, as you know. Everything may not be there if things are not making sense. There are only 2 lines needed 1) Sheet - controls the sail 2) Halyard - raises the sail up the mast and...
  4. tpenfield

    QuickSilver Dual Controls - Shift Interuppter Issue ???

    Quick Update: I took a look in the engine compartment and did not see any wiring near the throttle or shift linkages. So I tootchesk a look at the wiring under the area of the throttles. There are the kill switches . . . and there are the throttles . . . I am wondering if the white and...
  5. tpenfield

    O'Day Mariner Sailboat Restoration

    It has been a while since I updated my thread, mostly because I have not done anything with the boat since last winter/spring. I was at the point of separating the boat 'halves' (hull & deck) and had run into a bit of a snag with a bond of fiberglass putty at the transom. Well today, in a...
  6. tpenfield

    QuickSilver Dual Controls - Shift Interuppter Issue ???

    Update: I went to replace the 2 ignition switches on my boat today and when I opened up the dash panel I found that the terminals had quite a bit of corrosion on them. So, my thoughts were that maybe the corrosion is the issue not the switches. Here is a close up of the starboard engine...
  7. tpenfield

    Measuring RPM

    :welcome: You can go with the every OTHER setting . . . i.e. 4 stroke. BTW - which RPM monitor did you get? I have one on my modified snow blower. It is a Searon HM038M
  8. tpenfield

    water temp issues

    :welcome: See if you have got any impeller fragments stuck in some of the chambers of the thermostat housing. Also, make sure the 'insert sleeve' (red arrow in pic) has not spun around from its proper position.
  9. tpenfield

    Help with Bravo 1 and 350 mag mpi install

    It is a straight piece of 1-1/4" wire reinforced hose. The hose in under suction so the reinforcing is necessary.
  10. tpenfield

    Stupid newb hull repair questions.

    Just following along . . . I made a couple of pics that I *think* should depict the intended repair. The purple being the cloth layers and the pink being the filler (CSM, PB, etc.) So, I assume what we are looking at in the recent pics is the 'filler' (pink) Not sure that is helpful, but...
  11. tpenfield

    I found my old boat . . . .

    I also noticed that the boat still has the same beaching habits, based on the photos in the Ad . . . :D The Boat as Mine . . . The Boat as Theirs . . .
  12. tpenfield

    Advice needed

    Here is a picture . . . The key thing is to have a large center section where the engine will mount. Often you can make the section breaks at the point where the engine mount stringers meet the transom. that way you will have a strong transom structure and still be able to fit the wood...
  13. tpenfield

    I found my old boat . . . .

    UPDATE: I found my old boat AGAIN :eek: :) I happened to be looking through Formula boat listings on CL to help a buddy of mine find one, and wouldn't you know . . . I came across my old boat. It is definitely mine based on some of the unique markings on the boat and trailer that I could see...
  14. tpenfield

    Just purchased 16ft tri-hull, Any suggestions on a brand for new rollers???

    Here is a set that you can order (as many sets as you need) right here on iBoats. they have the inserts for both common size spindles. Wobble Roller Kit, Amber - Tie Down Engineering these are the non-marking kind, so they won't leave marks on the hull
  15. tpenfield

    Moeller fuel tank questions

    Yes, those are 'indentations' not holes. I assume that is what you are seeing :noidea: ​They are for support and provide some baffling. I assume the 'holes' are not open to the tank internal. Let us know if you see otherwise
  16. tpenfield

    QuickSilver Dual Controls - Shift Interuppter Issue ???

    I have the QuickSilver Dual Controls on my boat, which I absolutely hate . . . They are showing their age, and today I noticed what could be a growing problem. . . Cruising along at about 3400 RPM ( 38 mph) I noticed that when I put my hand on the control to adjust it slightly the RPM of...
  17. tpenfield

    Johnson 4.5HP- double check model year and water flow...

    Looks like it is plugged with mud . . .
  18. tpenfield

    Johnson 4.5HP- double check model year and water flow...

    I have the same motor in a long shaft (J5RLCSS) and it DOES have the pee hole. I happened to be running it yesterday. :) The pee hole is located above the exhaust port. Maybe the motor that you are looking at has a clog.
  19. tpenfield

    HELP I WANNA BLOW MY BOAT UP!!!!

    maybe it's time . . . :D
  20. tpenfield

    Repair or Replace a Ritchie Compass

    Update: I had the boat out today . . . the bay was very flat, so it made for a decent opportunity to install the new compass. Took a lot longer than I was planning (2 hours vs. 30 mins), but it is done. The wiring for the panel lights was a bit tricky to get at and splice, which took a lot of...
Top