Search results

  1. R

    Appropriate HP outboard for '65 Starcraft Mustang?

    Boats like that were popular in the day.------Brother had a 14' runabout with a 40 HP Evinrude.------Lots of fun on a small budget !!
  2. R

    Gearcase seal kit/water pump kit

    Not hard to do a gearcase at all.----No special tools required.-----Start by removing water intake screen .----Then undo shift rod connecter in there.-----Scrape paint off the upper shift rod if it has not been done before.-----Slide UPPER nut up.------Remove the split black plastic...
  3. R

    Appropriate HP outboard for '65 Starcraft Mustang?

    That boat would work well with a 33 HP ( 1965 to 1970 ) or 40 HP from the 60's.-----But if $$ are not an issue put a new motor on it.-----I am rebuilding a 1974 Johnson 40 HP for the grand son as it is a simple / reliable motor for occasional use.
  4. R

    Merc 850 Inline 6 Piston Scoring

    The inline 6 is a smooth runner.------Had a marina owner say that he could rebuild one in about 8 hrs back in the day.------Now says he does not want to see one anymore.-----Has sold all customers a new motor instead.------
  5. R

    150 Hp 2 stroke Optimax will not run at low idle.

    Take it back to the mechanic.-----Should be able to fix this in minutes.
  6. R

    150 Hp 2 stroke Optimax will not run at low idle.

    Agreed.-----But test air pressure and inspect that BIG $$$ air compressor too.
  7. R

    Mercury Mark 55E questions

    Should be easy to find a lower unit.----Your location ?----Visit ---John's Old Mercury ---site.
  8. R

    1983 Johnson 90hp - what happened to this cylinder?

    Ran very hot.---Poor quality / quantity of oil.-----Too big a prop.----Carburetor jet plugged.----Water pump in poor condition.----Water diverters out of place and blocking cooling water flow.----Timing too far advanced ----Sheared flywheel key.----There are so many things that need to be...
  9. R

    Replacing starter bendix on 1990 evenrude 25 HP

    Most outboard starter have a warning on them.------" DO NO HIT WITH A HARD OBJECT "-----It might crack / loosen the magnets.
  10. R

    1990 Evinrude 9.9 Leak Help

    Fairly normal for a 2 stroke.-----Were you running on a hose ? ---bucket ?-----Checked the thermostat ?-----Any water in the gear oil ?-----Pressure test the gearcase to check for leaks.
  11. R

    Replacing starter bendix on 1990 evenrude 25 HP

    Starters are fairly simple to check out.----Is this the factory original starter or something else ( cheaper ) ??
  12. R

    1979 Starter brkt,2 stroke Evinrude

    should be lots of those on E-bay.------from 79 to 2005 will fit.
  13. R

    1979 Starter brkt,2 stroke Evinrude

    Any idea what motor you have.---Model # is ?----Pictures ?----Your location ?
  14. R

    1991 DT100 Crankcase Puncture

    Motor has to come apart.------Looks like a skirt broke off a piston.-----Or connecting rod broke.-----No point trying to run this motor.
  15. R

    Evinrude Fleetwin 7.5 What Year?

    Flywheel is removed with a puller that uses 3 bolts.-----Bolts are a 1/4-20NC thread.----Do not put bolts in too far or you might damage new coils , if coils have been replaced.----All 1958 ( original ) coils are cracked or have been replaced
  16. R

    Evinrude Fleetwin 7.5 What Year?

    No need to remove the flywheel.----Post #2 clearly states that you can look through the flywheel to inspect this simple magneto.
  17. R

    Replacing starter bendix on 1990 evenrude 25 HP

    Just nuts and bolts work.-----Nothing to it.----Remember that no one on here can see , touch or hear your starter trying to work.----Up to you to do the inspecting / testing.
  18. R

    Mounting Bolt Compression of Transom

    I have a 100 HP motor taken off a Boston Whaler----Boat was scrapped as it was waterlogged.----Hard to believe that these " well regarded " boats can be in really bad shape !
  19. R

    Mounting Bolt Compression of Transom

    A Boston Whaler ?-----Sounds like this boat needs work.----A lot of work.----Check and see if foam is waterlogged.
  20. R

    Evinrude Fleetwin 7.5 What Year?

    Powerhead needs to be removed ( simple job ) to change water pump impeller.-----Something that you must do now.
Top