Search results

  1. R

    Johnson 150 Rebuild/Remanufacture Guidance

    The cavity for the long bolts gets water / moisture in there.-----Possibly salt water.-----Then NATURE takes over and OXYGEN joins with the aluminum,-----The white powder is aluminum oxide.-----There is now more material there since oxygen has packed itself in there one molecule at a...
  2. R

    1985 20hp Johnson outboard conversion 30hp timing

    Hugh---???-----Where did you read that the wrong timing can " blow up " the CDI's.------Just nonsense I say !
  3. R

    Johnson 150 Rebuild/Remanufacture Guidance

    Good luck with these projects.
  4. R

    1982 Evinrude 9.9 tiller handle throttle help

    Well---52 and 109 must rotate !-----Will rotate more if motor is in forward gear.
  5. R

    1961-1963 Starcraft Jet

    Compression test on the motor is step #1.------Remove floor in the boat and have a look under there.-----Likely needs transom work too.
  6. R

    Bent Flywheel 1998 Johnson 115hp

    Flywheel is scrap.-----I can't believe folks do that.-----If in --Canada----evinrudeparts.ca---might be able to help.
  7. R

    1959 Johnson V4S-11 50HP Super Sea-horse

    Perform a check on magneto belt timing.----Belt timing might be off.----Or plug wires going to the wrong cylinders.----Does spark jump a gap of 5/16" on all of the 4 leads ?
  8. R

    Just 3 Words

    Glad election done.
  9. R

    ‘89 150 gear set replacement?

    That tool can be used on motors from about 1980 to the present.------Surely shops have that tool kit !!-----Your location ?
  10. R

    1988 Mariner 115 HP Inline 6

    No it is not.------On the starboard side of the motor there is a wee oil recirculation line.-----Comes from the bottom of the motor and goes to top bearing.---Find it and inspect it.-----Serial # of your motor ?
  11. R

    Johnson 150 Rebuild/Remanufacture Guidance

    I have done this work with success.-----Good luck with your project 88
  12. R

    Johnson 150 Rebuild/Remanufacture Guidance

    Drilling a wee hole in the adapter just below the power head is the best way to get penetrating oil in there for those long screws !!
  13. R

    ‘89 150 gear set replacement?

    You have to shim new gears.----Using the factory shimming unit ( I have that item ) here.------Called gear pro's some time ago and answer on shimming ( using factory tool ) was not very clear at the time.
  14. R

    97 mercury force 90hp flooded with 2stroke oil

    No need to mix in a separate tank.-------Add oil then the fuel coming in will mix it all up.-----Post #1 is missing some information.----Was tank completely empty ?------How long have you owned the boat ?-----First time that you added the oil before adding the fuel ?
  15. R

    Locked down 7.5 Johnson

    ??----There must be a bolt on top of the bracket that the motor spins / tilts on !-----It is item 25 and has a friction block and tension spring as well.----Was motor used in salt water ?
  16. R

    Awful Boat-Outboard Mismatch.-

    What is the distance from the BOTTOM of the hull to the top of the outboard bracket / pod ??
  17. R

    Drops of gear oil Johnson 70 TLESB

    A well used 30 year old motor needs a seal kit !----All seals including the o-ring on the shift rod.
  18. R

    Should I purchase a 60HP 1969 Johnson hydro-electric shift outboard motor?

    There should be no water in any modern gearcase.-----They are sealed to keep oil in and water out !
  19. R

    Evinrude motor Purchase?

    ???---Lot of speculation here and everywhere.---BRP / Johnson / Evinrude have been supplying many consumable parts for motor that were built 50 years ago have they not ?
  20. R

    1993 Johnson 15 hp Head Torque Question

    You have a wonderful opportunity to look / listen / learn.----Torque those bolts to 160 inch lbs !
Top