Search results

  1. R

    Rebuilding only 1 side of the power head

    It is a mistake to put new rings in worn out grooves on a V-4 crossflow engine.-----Do yourself a favor.----4 new O / S pistons.
  2. R

    75 Evin 9.9

    Does not mean very much.-----Maybe a minor change mid year.
  3. R

    Help please with starting 55HP Evinrude Triumph

    Parts motor.------Also proof that wiring and 12 volts is not well understood.
  4. R

    1990 Envinrude 9.9 only goes at idle speed wont go wot

    Where would you find a " new " carburetor ?----Trouble shooting should quickly determine where the problem is !
  5. R

    Evinrude 4hp frozen solid

    Cut the head off the bolt.
  6. R

    propeller shaft end play

    You are good to go.
  7. R

    Johnson 50 won’t exceed 2k rpm under load

    Not your issue but the roller needs to be replaced.
  8. R

    1986 90hp Tower of Power has intermittent miss

    Open low speed mixture screws 1/8th turn at a time and test run.-----Also test run on another portable fuel tank.
  9. R

    Help please with starting 55HP Evinrude Triumph

    Model # is ?-----Nobody can help you decide on what to do with it.------Any pictures ?
  10. R

    Water in gear oil

    Install a seal kit.----Less money than a complete gearcase / parts.-----Or losing a season while looking for affordable unit / new motor.
  11. R

    Evinrude 4hp frozen solid

    Grind the head off that bolt.-----Lower unit then should come off.-----Use heat on the housing to then remove the rest of the bolt with vise grip.
  12. R

    Help please with starting 55HP Evinrude Triumph

    Start a new thread.------You will need to shop for a control box.----Johnson single lever. --Or Evinrude push button.-----Your location ?
  13. R

    Johnson 50 won’t exceed 2k rpm under load

    Post a close up picture of that roller.---Sometimes the clear cover is missing on that roller.
  14. R

    Johnson 50 won’t exceed 2k rpm under load

    The roller in that curved slot may need attention.
  15. R

    New impeller, tell-tell just spits

    A smart move is to install a new impeller on a ---" new to you motor "-----So why did you not remove the lower unit to do that.------And are you test running in a bucket with water 6 or 8" above the impeller ?
  16. R

    Johnson 50 won’t exceed 2k rpm under load

    The " thingy " with the red lever is the electric primer valve.----Opens when you push in the key and hold it in for cold starting.----The red lever is for manual operation.----The red lever is shown in the correct position for normal running.
  17. R

    1986 Johnson 175 missing

    Factory ( BRP ) has an epoxy kit just for that job.-----Other epoxy materials may also work.
  18. R

    Evinrude Fastwin values?

    Those old fastwins are actually not that heavy.
  19. R

    1957 Evinrude 5.5

    Model # in the one picture 5518 is for a 59 model !!
  20. R

    Evinrude Fastwin values?

    These motors are not all that valuable to the public.-------That is because most shops refuse to work on them.-----Those that know how to fix them have a bunch already !----Labour at a big shop is the problem.------If you find enthusiasts in your area ( members of AOMCI ) they may help...
Top