Search results

  1. acdc96

    Carb and choke issues

    Re: Carb and choke issues It's not a electric choke. I included a pic of the choke. It's a 4bbl. Rochester Quadrajet carb. I believe the motor is a 1987 but it could be a 1986.
  2. acdc96

    Carb and choke issues

    My 1987 mercruiser 260HP V8 has carb problems. I just started the engine today since August/September of last year and it runs like crap. I just cleaned all the water hoses, thermostat housing, and water circulating pump. And put it all back together. The carb has not been rebuilt in a while...
  3. acdc96

    Running a mercruiser on a remote tank

    I want to run my 1987 Mercruiser 260HP 350 V8 on a 6 gallon remote gas tank. The gas tank is from my Jon boat that hooks up to my force 9.9HP. The gas in the boat now is bad (5-6 years old). I want to hook my 6gal tank up to it to run fresh gasoline through it. I disconnected the fuel line from...
  4. acdc96

    Trolling motor prop

    I have a 90's Minn Kota Turbo 35 trolling motor. It has 27lbs of thrust. I broke a blade off when going to my dock at low tide. I think I hit a rock. I threw out the prop when I got back to my dock. I need a new one and I don't know which one to get? Model #: MK01063913A From what I remember...
  5. acdc96

    Water circulating pump not turning

    I just finished putting the bellows on my alpha drive and turn the engine over to make sure their is no bad clunks and the water circulating pump did not turn (idk if it's frozen) wen I turned the engine over before I took of the drive off it moved freely. The engine is not stuck. I don't want...
  6. acdc96

    Mercruiser Alpha 1 Gen 1 Maintenance Questions

    I need to service my alpha 1 drive to replace: Bellows, Gear Case Oil, impeller, and a couple of other things. i have not serviced the drive in a couple of years cause i have not used the boat. I've only changed the gear case oil and the impeller once since I've owned the boat. I've never taken...
  7. acdc96

    Want to buy a boat with a mercury 50hp with carb problems

    I'm considering buying a 1974 renken 14'8" boat with a 1985 mercury 4 cylinder 50hp 2-stroke. talking with the guy over the phone he said that the bowl on the upper carb is striped. What does this mean???
  8. acdc96

    Insane question!!!!

    My Friend asked me to follow him with my 14ft Jon boat with a 9.9. He has a 22ft cruiser with a sterndrive. He just restored the boat and did a lot of engine work. He said if he breaks down he wants me to tow him down river to the boat ramp with docks!!! The boats would be side by side tied off...
  9. acdc96

    Force 9.9hp cowling in the way

    I have to replace my sparkplugs on my 1991 Force 9.9. The top one is easy to take out but the bottom one I can't get out. It's not stuck its just the lower cowling is in the way. I need to service the carb also but it's such a tight spot I don't want to loose a bolt/screw. Is their a way to drop...
  10. acdc96

    Synthetic grease vs. regular grease

    I recently repacked the bearings in one of my hubs. I borrowed my buddy's grease gun (the big one not the little 3oz ones I have). The bearings where clean, shiny, & not grease at all in it. I packed the bearings and noticed the grease lacked a shine and was very dull looking. I knew it was...
  11. acdc96

    Alternator removal

    On my 1986 mercruiser 260hp V8 I want to remove the alternator so I can get to the spark plugs easier. Do I need a special tool to remove it from the pulley and block? It needs to come off any ways cause I got a new one.
  12. acdc96

    Marine vinyl cleaning & Teak oil stain

    I've been working on my boats engine like crazy. I go over the gunnels instead of the swim platform cause the outdrive bottoms out. Since I have grease and oil residue on my hands their is some residue on the vinyl. I know certain cleaners will degrade or damage the vinyl. How can I get the...
  13. acdc96

    Prop rotation

    I just got an outboard with no prop ( the guy I bought if from bought it for the prop) but I don't know which prop rotation to get (clockwise or counterclockwise)? When looking at the shaft the shaft turns counterclockwise. ( looking from where the shaft comes out of the gearbox) Can't post...
  14. acdc96

    How Fast Does Your Boat Go?

    I want to know how fast you have gone in your boat? Knots or MPH... On a calm day, Here's mine... 21ft Cuddy with a 260hp V8: 55-60 mph 14ft Jon boat with a force 9.9hp: 20mph
  15. acdc96

    converting a '91 force 9.9hp to a 15 hp

    I want to convert my 1991 force 9.9hp to a 15hp outboard. i know they use the same cowlings and lower unit. also, alot of the same engine parts. what would i need or need to do to convert it?
  16. acdc96

    Wire Connection Problems

    On both my trailer and boat the wiring in them are mostly copper. I'm fed up with connectors cause of all the corrosion that occurs, so I'm taking out most of the connectors and just soldering them together ( Except for ring, spade, & plugs connectors). On some of them when i strip the wire...
  17. acdc96

    Trailer tire care

    I have to boat trailers. One is a single axle and the other is a double axle. I put new tires on both of them last year. Since tires are so expensive to replace on my dual axle I want to prevent dry rot from occurring as much as possible ( eventually the treads will wear down or it's gonna dry...
  18. acdc96

    Trailer lights and rust issues

    I have a EZ loader trailer with a 21ft boat on it. Dual axle, galvanized, roller, & surge brakes trailer. The light problem I have is the drivers side tail light and clearance light do not light up when the driving and head lights are on. But the brake light works fine. The other side is fine...
  19. acdc96

    Low budget Mud Motor

    I want to make a mud motor for my Jon boat. I want to keep the costs low. $100 excluding the engine. I have a welder and a lot of tools to make it ( I don't have any lathes or milling machines). I can get a motor from 4hp - 10hp. I have a basic idea of how I'm gonna make one. My dilemma is how...
  20. acdc96

    Force 9.9 starting/shifting problem

    On my force 9.9hp, lately the shifter has been (sticking). When I start the engine and put it in gear it Go's in smoothly when I shift back into neutral it's fine too. But when I goto shift into reverse or restarting it after running ithe pull start jams up and it won't go into reverse. I think...
Top