Search results

  1. acdc96

    Aluminum boat sits off balanced on trailer

    I've had this problem for a while now but didn't do anything about it until my trip to lake George coming up. My 1991 14ft seanymph Jon boat sits on a 1991 LiL Rider bunk trailer. The bow doesn't have any support. So it tends to tip forward while on the trailer. I used tie downs to keep it level...
  2. acdc96

    Just rebuilt water pump on alpha drive & the LU won't go back on

    I just rebuilt the water pump on my 1987 Alpha One Gen 1 outdrive. It came off easily and was very clean on the inside. Put the new parts on and now the dam thing won't go on. Spent a half hour trying to get it on!!! First time this has happened to me on this drive. The drive is in neutral and...
  3. acdc96

    Thermostat temp

    I need a new thermostat for my 1988 Nissan 18HP. Their are different temperatures for the motor. Will a 143 degree thermostat work?
  4. acdc96

    Lower unit stuck on 18hp nissan

    I'm trying to change the water pump and the lower unt won't come off. I took the four nuts off and sprayed the unit with WD-40 and smacked it with a rubber mallet to try to get it free. Any ideas on how to get it off??? Is their any hidden bolts or it has to be in forward??? 1988 Nissan 18Hp NS18C2
  5. acdc96

    Thermostat clogged up

    I recently aquired a 1988 Nissan 18hp outboard from my cousin. The engine runs not the best but I'm in the middle of a carb rebuild. When going through the cooling system the impeller was completely shot. I ordered a new one and installing it this afternoon. I took of the thermostat housing and...
  6. acdc96

    Trailer brakes question

    My EZ loader trailer had brakes on it at one point. The previous owner took half the caliper off cause they froze up due to use in saltwater. I've had the boat and trailer for 12 years now and recently down graded my truck to save fuel. 2001 Ford F250 super duty 2WD to a 2000 Dodge Dakota sport...
  7. acdc96

    1988 Nissan 18HP starter broke

    The pull start on a 1988 Nissan 18Hp outboard Went and I can't find a new pull start! Any one know where I could get one? The whole mech is shot.
  8. acdc96

    Engine oil synthetic?

    My 1987 mercruiser 260hp V8 5.7L calls for 25W-40 full synthetic oil. But in my engine it has regular oil in it. Mercury said to use synthetic but the local marina said use regular cause it might screw stuff up inside if it's mixed. Opinions?
  9. acdc96

    Hydrofoils on lower units?

    Lately I've seen a lot of people with bolt on or clamp on hydrofoils on their outboards and stern drives. Why do people put these on their drives?
  10. acdc96

    Fuel filters/pump/tank issues

    Re: Fuel filters/pump/tank issues that's the photo of the pump I was talking about. I took it off to get a better pic
  11. acdc96

    Fuel filters/pump/tank issues

    Lately I've been restoring my 1987 Celebrity/Calais boat. I'm in the middle of carb and fuel work. I just started draining the tank of the fuel and while taking the fuel sender unit off it fell in. I can see it but the hole is to small to fit my hand in their and my long needle nose pliers don't...
  12. acdc96

    Volvo penta outboard

    I found this Volvo Penta outboard. It says sail 90 on the side it's on the smaller side (between 9 & 20hp) and it's a long shaft. I don't know anything else about the motor. I know Volvo penta makes stern drives and inboards. Anyone know about this weird outboard?
  13. acdc96

    anchor size

    i need a anchor for my boat. 1991 seanymph 14k aluminum boat with a force 9.9hp i boat in a tidal area with some strong currents at times. sand/gravel/mud bottom what size anchor would be best?
  14. acdc96

    Mercruiser carburetor rebuild or replace?

    My 1986 mercruiser 260hp 350 V8 needs a carb rebuild. It has a Rochester Quadrajet 4BBL carb. I've heard that the quadrajets are very complicated to rebuild. So should i take on the rebuild or get a used Holley or edelbrock carb? If I get a different carb which one do I get?
  15. acdc96

    Dealer & Marina repair costs

    I hate bringing my boat to my local marina for service. I swear every time I bring it their it cost me at least $1000 each time. B.O.A.T . But about 7 years ago I stopped that nonsense and learned how to do everything myself. When my starter went on my engine. (350 V8 mercruiser) it cost me a...
  16. acdc96

    Force 9.9 water pump impeller change

    My 1991 Force 9.9HP outboard is due for a water pump impeller change out. I have never changed it myself. I'm the second owner. Bought it from my cousin about 4 years ago. The thing is in pristine condition. clean and works perfectly. He told me that it was changed about 8 years ago. The marina...
  17. acdc96

    Marine vinyl cleaning

    I recently put new marine vinyl in my boat to replace the old rotted stuff. Lately I've been fixing up the engine and been climbing out the side of the boat instead of the transom for some reason. The vinyl has some grease and grime on it. I've been trying to put a towel over it to keep it...
  18. acdc96

    Stern drive won't come off

    My buddy has a boat similar to mine with same exact engine and drive. So he asked me to help him replace the bellows in his drive. I took off the trim rams and the prop. Put the boat in forward gear like it said. Took off the 6 nuts that hold on the drive. Started pulling the drive and it did...
  19. acdc96

    Engine tune up/repower questions

    I'm tuneing my engine up for this coming spring. The boat hasn't been in the water for a couple years. The engine runs OK, needs some carb work. I just put in brand new bellows. I ordered water pump rebuild kit, new trim solenoid, and trim cylinder seal kit. I have some questions. 1. Should I...
  20. acdc96

    Removing gas from a tank

    I got 30+ gallons of bad fuel. I started pumping it out by hand but it was taking way to long. I want to buy a cheap electric automotive fuel pump off eBay to pump it out for me? It's just a regular fuel pump you would find in a car. It would pump into a 55 gallon drum that's behind the boat...
Top