Search results

  1. JASinIL2006

    Nautius Smart Trim Tabs

    Even without re-adjusting, SmartTabs work OK for correcting a small list while at planing speed. If the list is pronounced, I'd probably look into hydraulic tabs.
  2. JASinIL2006

    Can't get boat even on bunked trailer.

    The taller PVC guides are more of a visual aid to help you locate the end of the trailer; in many cases, they are really not intended to guide the boat. (The flat, carpeted guides are better for that.) My boat was hit by gust of wind that pushed it into a PVC guide and it was enough to bend the...
  3. JASinIL2006

    Buying a new mattress

    It's time for the Admiral and I to get a new mattress, so we're mattress-shopping -- one of my least favorite activities. I imagine we'll be doing the usual visiting of bedding stores and trying to find something we like, but I was wondering if anyone has seen any reliable buying guides for...
  4. JASinIL2006

    Screw and Pilot Hole Sizes

    That would work, but you still need to prevent water from entering the hole and running along the threads, so you're back to using epoxy or some sort of sealant.
  5. JASinIL2006

    Should I get this FREE project boat?

    This is a tough market for buying used boats. Prices are ridiculously high compared to pre-COVID times. People are asking (and getting) outrageous prices for pretty crummy boats. I suspect the Restoration forum will be having many, many new visitors in the coming months and years as unwitting...
  6. JASinIL2006

    Screw and Pilot Hole Sizes

    If you put Marine-Tex in the hole, I'd be concerned about stripping the head of the screw when trying to remove it. Maybe if you sprayed the threads with silicone first, so the Marine-Tex doesn't grab much? Personally, I'd probably experiment some with some test holes in a sample slug of...
  7. JASinIL2006

    Wheel bearings full of water

    Yeah, I never assumed Bearing Buddies had anything to do with getting grease to the bearings; that is done when you service the hub and pack the bearing with grease. BBs are just supposed to maintain that postive pressure in the hub. If you have to keep adding grease to maintain that pressure...
  8. JASinIL2006

    Transom Browning

    Any toilet bowl cleaner that has oxalic acid or muriatic acid will do the job. I use ‘The Works’ and it will take that stuff right off. You do have to protect bare metal, though.
  9. JASinIL2006

    Screw and Pilot Hole Sizes

    I never found anything like that; for me, it was trial and error. I broke my share of stainless screws when attaching my deck to heavy fiberglass stringers. Those screws are so brittle... you hole needs to be nearly the size of the screw, just a hair smaller. I found that putting a bit of 3M...
  10. JASinIL2006

    Crack in Hull

    I absolutely would not use that boat until it's repaired. You would be risking your life and that of your passengers.
  11. JASinIL2006

    Possible boat purchase!

    The sound test is pretty much meaningless for checking the transom. Most owners won't let you drill test holes, but you might be able to poke around in the wood of the transom with a screwdriver to see if the wood is solid. A 25+ year old boat is a pretty candidate for rot, and since the boat is...
  12. JASinIL2006

    Jacking Trailer

    Correct, but the load is distribute evenly across all the surfaces, not concentrated in one spot. It's not a safe way to support a jacked up vehicle, especially if a person will be underneath it.
  13. JASinIL2006

    Hello, New member. Assistance Please and tks

    Boats break. Outdrive parts fail. If it's running now, what happens if it needs repaired in a week? I just don't understand why anyone would want to take that gamble.
  14. JASinIL2006

    Transom replacement

    If you're really worried about water intrusion through the screw holes, you could always fill them with 3M 5200 (or something similar) before installation.
  15. JASinIL2006

    Jacking Trailer

    I don't find jacking up the trailer to be a particularly difficult task. I do it every winter so the boat and trailer aren't sitting on the tires. Takes about 5 minutes.
  16. JASinIL2006

    New to me boat trailer: Safety chain and loading with bunks.

    I think a safety change is always a good idea. It would help prevent the boat from coming up over the bow stop and into your tow vehicle should you hit something and come to an abrupt stop. Even if the trailer doesn't have an attachment point, you can still loop the chain around the center...
  17. JASinIL2006

    Sharing a berth

    That kind of berthing no doubt works great when you have a trained Navy crew managing it. Maybe not so much if you have to entrust Joe Weekendboater to get it right...
  18. JASinIL2006

    Jacking Trailer

    My jack stands will not slip... they have a pin that runs through them (see below). I'd far sooner trust my neck under something heavy to a jack stand than cinder blocks. Cinder blocks can shatter under a concentrated load. They're fine for walls, but for supporting a load focused in a small...
  19. JASinIL2006

    Hello, New member. Assistance Please and tks

    With a 30+ year old boat, who made the boat is much less important than how well the boat was cared for, and the conditions under which it was used and stored.
  20. JASinIL2006

    Replacing just the rotted area or whole back of boat/transom?

    It's crazy to go that far and not replace the entire transom.
Top