Search results

  1. F

    No power to my gauges

    Hi, Went out yesterday, and when I turned the key I noticed they had no power going to them. Battery,trim, and tach not working and no lights on all6 of them. So I reckon it's a supply prob. Now the power comes from the remote as does the tach wire. All connections seem fine, and hve been...
  2. F

    will OMC prop #013027 fit 1990 60hp

    will OMC prop #013027 fit 1990 60hp, i've seen this for a good price for a stainless prop and am just wondering if it'll suit my motor.
  3. F

    1990 60hp, 2nd broken reed set in 4 weeks..why??

    I lost approx 2000rpm yesterday while starting to throttle up from trolling for 5 mins. had a look this evening and the top carb has a broken reed . Almost 4 weeks to the day I had to replace another but at the bottom carb. Is it common for reed plates to fail ? or is there some other reason...
  4. F

    OMC V4 prop to fit a 3 cyl?

    I currently run a 15" prop but it's at the highest end of my recommended range at WOT. I have been offered a 19" that was on a V4 for free. Will this fit my gearcase ? If not can any adjustments be done to it so it can. I know I need a 17" but you can't borrow props over here from prop shops...
  5. F

    How low is low for water pressure ?

    After fitting a water pressure gauge to my motor as I had a slight overheat , so replaced the impeller just to be sure and also fitted a gauge. With the motor trimmed or tilted in shallow water, what PSI is ok for the engine when trolling along? Or so long as there is even 1 psi there's water...
  6. F

    help find my slip % please.

    hi, am currently running 1990 johnson 60hp on a 13ft ski boat (avatar) weight inc me and gear is approx 300 -330 kgs. using a 13 3/4 x 15 prop fully trimmed out it's at 6000 prm doing 42 mph (on speedo my gps is gone missing) I don't know the gearbox ratio for this motor as I lost my manual...
  7. F

    Help me dechiper my fishfinder..

    My other half gave me a Garmin echo 500c a few weeks ago for my birthday but I can't get my head around a few things on even though i have read the manual that came with it:facepalm:. What is better for trolling 70 or 200 hz? why?? Why does it scroll so quickly even when stopped and anchored...
  8. F

    Fuel misting from bottom carb

    what would cause fuel to mist from my bottom carb 1990 johson 60hp? It's bad enough that you can clearly see it and it will soak your palm if you place it in front of it. Other two seem fine.
  9. F

    is it my fuel pump??

    1990 60hp johnson last night it was kinda surging at wot and rpm dropped fromm5500 to approx 4000 , i thought that i dropped a cylinder because of the loss of power. I limped back to the dock just to be sure and when I go there it won't idle up to the dock it just stalled. This evening I put...
  10. F

    battery being drained

    I changed over my remote 3 weeks ago and ever since I find that my battery is being drained. Every time I go to start it , I have to charge the battery first. Is there any way to find out what's draining your battery? I like to try this first before i go and install a battery cut-off switch as...
  11. F

    My bad prop repair experience.

    thought this may be the section to post this. have 2 props for my 60 hp johnson. Both over the years both have got a banged up and brought to a prop repair "specialist " over here. Seeing as I didn't know any better I thought "wow this guy's great , he fixed my props like they were brand new!"...
  12. F

    60hp hits 6000

    Hi, Boat in my avatar is a 13 ft fletcher ski boat. Powered by a 1990 johnson 60hp. It over went a complete rebuild over the winter (boat and motor). I'm currently running a 13 1/4 x 17 pitch and speedo says 38mph ( I've no gps). RPM is hitting 6000 -6100 at wot , I have no idea of boat weight...
  13. F

    Stalls when throttling up in back pressure ....Help needed

    1990 60hp johnson senario is ; It'll idle on muffs, in a test barrell and in the river It'll run in gear on muffs (not to be done i know) , it'll run in gear in a test barrell It WON'T run in the river once throttled is applied it'll just die out. What has been done and checked and rechecked...
  14. F

    different carbs now I've another issue Johnson 60hp... update....

    60hp 1990 I discovered cracked pick up tubes which I believe resulted in the problems I had trying to get the motor to idle. I had an old set of 70 hp carbs which I threw on in their place and WOOHOO! problem solved it idled great on muffs. Off down to the river , put her in and Yes ! it idled...
  15. F

    60 hp will only go when choked ..carbs rebuilt.

    I am at my wits end here so please advise, 1990 60 hp johnson I was originally having running issues so striped and rebuilt carbs inc. welch plugs. They were all cleaned as best they could be. All fuel lines replaced from the tank to carbs Ran ok for a week then bang more running issues...
  16. F

    timing light flash question..

    hi guys, Can someone help me out here, I recently changed my CDI out of my 1990 60 hp j60elesm as i was getting errratic spark.Yesterday when i went to go out it would stall when put into gear and wouldn't idle. So at home I checked compression which was 118,115,112 all within tolerance...
  17. F

    johnson 60hp surging at wot

    1990 60hp j60elesm took it out for a spin yesterday and at wot it surged very badly. Large fluctations in revs (i've it set to do 5600 WOT) from 5600 to 4800. Once eased off into 3/4 throttle it'd cruise all day but go to WOT and it'll start surging. I swopped out the fuel line and bulb last...
  18. F

    no warning tone from the horn when turning the key

    I replaced my horn in the remote becasue testing showed it wasn't working. Now the replacement when grounded at the head does sound but when turning the key on it doesn't. Should I be worried or will it work just fine in an overheat condition?
  19. F

    i/o newbie looking for info

    My other half or "the accountant" as I call her :p has agreed that it is ok for us to splash out and buy a bigger craft. The thing is ........I know squat about i/o and what to look for. I have a good knowledge of outboards mainly 2 stroke and have worked on cars and tractors, so am mechanically...
  20. F

    is my control cable stretched? UPDATE..

    1989 johnson 60hp I can't get my motor to idle, have compression,spark and have done numerous lync and sync's according to manual. I have noticed that at wot the butterflies aren't 90* or horizotal, when i return the throttle to netural the cam follower doesn't return to idle position. If i...
Top