Search results

  1. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    @racerone, I've not took one apart as of yet. But I agree, seems to be very simple. Jeff
  2. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    @racerone, comp is 120 all four cylinders, spark is great, lower unit oil nice and clean, no water. Speed was 37 mph by GPS with 3 Adults on board during water test at 5500 rpm, around 31 mph at 5000 rpm. And I am a big guy, 250 pounds. Jeff
  3. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    I found a FSM on the old eBay this morning. Should be in good shape now.
  4. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    I just wasn't expecting it to be that much. Not that I won't pay it. I will for peace of mind. Jeff
  5. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    @tphoyt , I found it. Thank you for that. Wow they are proud of it. $150.00 ouch. Now to find a FSM. Jeff
  6. wvmedic

    1995 90 HP Evinrude E90TLEO crossflow

    I have been searching the web for a VRO rebuild kit for my newly acquired 1995 Evinrude 90 HP E90TLEO crossflow outboard. I am seeing the kits on Amazon and eBay, are there any OEM kits available? Are there any reliable kits on Amazon or eBay? Nothing wrong with the one currently on the...
  7. wvmedic

    1995 Spartan Supreme roller trailer

    @JimS123 , I'm going to look into new rollers and definitely lower that keel roller a bit to tighten up the hull to the front rollers a bit. That thing made so much racket clanging around towing it..... Jeff
  8. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, gotcha and thank you.
  9. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, I agree the picture is deceiving. I might slide the winch post forward an inch or two. I'm going to lower the bow keel roller about an inch as well. I think that might fix the issue of the hull not sitting on the front rollers solid enough. Jeff
  10. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, the rear rollers are only about two inches in board from the transom edge. Where should the transom be sitting on the rear rollers? Jeff
  11. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, understood and thank you for that. Jeff
  12. wvmedic

    1995 Spartan Supreme roller trailer

    @airshot, I see the crack now. No idea how I missed that. I'll absolutely look at moving the boat forward. I want a different tie down system for the stern than is on there now. It's secure, but I want the ratchet system I've seen that stays attached to the trailer. I also want to use a transom...
  13. wvmedic

    1995 Spartan Supreme roller trailer

    I know this is picture heavy, I am sorry about that. The rollers are in great shape. The rear of the boat is solid on the 8 aft rollers. The front 8 are just touching the hull and I can wiggle them by hand. The only option I see is lowering the keel roller at the bow to lower the the hull...
  14. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, understood. Though with a slightly larger diameter roller, my thinking at least. Would give a smidgen more hight to the rollers making better contact with the hull. I will check the rollers over, checking the washers and such. I like the thought of the rollers for shallow launch...
  15. wvmedic

    1995 Spartan Supreme roller trailer

    @dingbat, thank you for your response. They seem to be in good shape. The guy that previously had this boat and trailer took meticulous care of it. So I am thinking that they have been replaced. However, I'm not sure they were replaced with the correct diameter rollers. Jeff
  16. wvmedic

    1995 Spartan Supreme roller trailer

    I just bought a 1995 Crestliner sportfish 1750. It is setting on a 1995 Spartan Supreme roller trailer. The rollers are really loose, they move around a bit. I'm not sure that these are wobble rollers, but they sure do wobble. With the boat on the trailer, the rollers do move around and you can...
  17. wvmedic

    1980 SS 181 rebuild.

    Thank you MNhunter1, I appreciate the response. I'm still debating epoxy vs the Old Timers Formula. The one issue I'm trying to figure out is. Will I be able to glue the Nautolex down, and with what glue? My 2019 Alumacraft came with Nautolex and I really like it. I plan to wrap each section...
  18. wvmedic

    1980 SS 181 rebuild.

    Hello all. I just bought a SS 181 back that I bought in 2009. It has went through a few hands, deck has been replaced and needs it again. I am not sure what ply was used or if there is any flotation in it. The previous owners have really jack legged a lot of things, using drywall screws...
  19. wvmedic

    1980 120hp

    Gotcha Scott and thank you. Jeff
  20. wvmedic

    1980 120hp

    Sounds good, I think I could drill 2 more holes. I do appreciate the information. Jeff
Top