Search results

  1. flyingscott

    1990 150 HP V6 Leak Down Fail. Help!

    What is the compression? What was done to the motor before starting it after 8 yrs?
  2. flyingscott

    Fleet Scott 14.1

    You might be able to put an OMC coil on the laminate. Are you sure the coil is bad? Those motors had excellent coils and seldom went bad.
  3. flyingscott

    XD50 vs XD100 in mid 90s 3 cyl

    I run xd 100 it is one of the best 2 strk oils out there.. I use it as pre mix n my 92 70 hp.
  4. flyingscott

    2001 Mercury 115 ELPTO excessive oil

    Those motors are impossible to work on without a factory manual. The excessive oil could be a stuck float in a carb or a leaking accelerator pump.
  5. flyingscott

    2001 Mercury 115 ELPTO excessive oil

    You did not get a factory manual it will be specific to your serial #. Call a dealer.
  6. flyingscott

    55ESL69A electric solenoid assembly

    Get rid of the seloc manual and find a Factory manual.
  7. flyingscott

    2001 Mercury 115 ELPTO excessive oil

    Those motors have an interesting fuel system because of the 2+2 operation. Maybe get a factory manual to work on your motor. Those oil pumps generally don't fail.
  8. flyingscott

    Turning a 1995 50hp triple into 60/70 hp?

    They never fuel injected the 56 cid motor. And they made the 56 cid carb 70 hp up until around 2005
  9. flyingscott

    2001 Mercury 115 ELPTO excessive oil

    Have you done any testing or just guessing? Are you sure it is just not flooding out?
  10. flyingscott

    Unfindable(so far) gremlin

    You two seem to have all the answers I will leave you to it then. Good luck with your motor.
  11. flyingscott

    Unfindable(so far) gremlin

    Sorry off by a yr and am still going to go with a bad condenser.
  12. flyingscott

    '88 Evinrude model difference.

    The T has Tilt and Trim and your motor looks to be repainted.
  13. flyingscott

    Unfindable(so far) gremlin

    Pretty sure that has a low tension magneto. They tend to destroy condensers
  14. flyingscott

    1995 Johnson 9.9 slow speed idle fix? Need help!

    Push both buttons in and pull. Be careful though there are 2 pucks inside the tiller and they like to go flying.
  15. flyingscott

    1985 Mercury 25xd starting issues

    Good idea maybe the book will tell you something you want to hear.
  16. flyingscott

    ghost motor?

    It is a 1975 model says so in the model #
  17. flyingscott

    1985 Mercury 25xd starting issues

    The idle screw is up by the recoil safety. Sounds like you need to do a link and sync> Did you verify fuel is squirting out of the primer hole in the carb?
  18. flyingscott

    1985 Mercury 25xd starting issues

    Is the primer working? When the square Knob is pulled out all the way does the wire pull on the magneto? Is the idle screw set correctly? That Is on the recoil safety.
  19. flyingscott

    1985 Mercury 25xd starting issues

    Have you done a link and sync? Why was the timing linkage touched? Is thios a tiller or remote model?
  20. flyingscott

    Water leaking by spark plugs

    No quick fix for that and you will probably break bolts off.
Top