Search results

  1. alldodge

    Milk in reservoir, not in outdrive

    Actually I don't see water in the lube bottle I see sludge, which builds up over time
  2. alldodge

    How to adjust Mercruiser 3.0 Carburetor

    Not the starter, the starter cables ground and hot
  3. alldodge

    1979 Cobalt 18DV w/ MerCruiser 260 and Alpha 1 - No Raw water to engine

    I looked it up in manual 3 and it appears to have 2 different thermostat housing
  4. alldodge

    How to adjust Mercruiser 3.0 Carburetor

    I'm reading 2 possible issues: The starter struggles, is the Bat fully charged (12.7V) and our the Bat cables clean and tight? Throttle at full open, Is the choke closed when cold, is it flooding?
  5. alldodge

    Milk in reservoir, not in outdrive

    The line going to the transom assembly or the fitting has a crack
  6. alldodge

    Connect alternator outputs of two motors to battery bank

    I do like the isolator But I'm thinking about the sense lead connection. The ALT needs to be able to read the voltage at the BAT so not to over or under charge. A Bat switch could be used but would need to switch Without looking close at both Apps I'll assume neither puts out much in the way of...
  7. alldodge

    How to adjust Mercruiser 3.0 Carburetor

    Does this happen each morning/day or is it left for a week or more?
  8. alldodge

    2 Stroke Oil Thread

    Posted on another's thread than realized I'm breaking a rule and hyjacking, so.... deleted my post Anyone ever use the synthetic stuff like amsoil, stihl in a 2 stroke OB? I've used The Syn at 100:1 on small (chainsaw, rototiller) 2 stroke for years and never had an issue, and the plugs don't...
  9. alldodge

    Boats from work.

    :ROFLMAO: Was the wife involved in that one also :unsure:
  10. alldodge

    1979 Cobalt 18DV w/ MerCruiser 260 and Alpha 1 - No Raw water to engine

    Welcome Remove the drive and back flush. If water flows it's in the drive, if it doesn't it's between cooler and transom assembly
  11. alldodge

    Mercruiser 350 MAG MPI

    Flat top dizzy cap doesn't have a base timing mode. The dizzy is installed as shown
  12. alldodge

    New Stuff on Vehicles likes/dislikes

    Think my Son's BMW took a dump last week. Said alert came on saying "drive train issues. Then his turbo got real loud and motor stopped. It's a some kind of a mid size with 4 cyl turbo. When he first got it I asked him why BMW? Said it was a good deal, his friend knows them and has same motor...
  13. alldodge

    I was just four months old

    I waited until Picard was over as well as Orville and signed up for 1 month (no commercials) and watched all of them, wasn't hard
  14. alldodge

    Mercruiser 350 MAG MPI

    Welcome Part number 865926 is a 555 ECM and it uses a 4 pin connector to link to scanner (Rinda.com) Being a 2005 it would use Rinda connector 94006 and either Techmate Pro or Diacom Having to much fuel when starting can be a few things, but I would start with measuring fuel pressure at the...
  15. alldodge

    Volvo Penta 5.7GXIC-J Misfiring/Black Smoke

    Many threads on this and other forums of folks buying and finding out later they were junk. Think about it this way A brand new injector may be over priced but even at $100 each would be a good deal. Making an injector has high degree of tolerances and those that don't make it get trashed...
  16. alldodge

    Volvo Penta 5.7GXIC-J Misfiring/Black Smoke

    Do not do that, buy no injectors from ebay or amazon, they are cleaned up junk I would contact Smitty and get a price from him to clean and flow test, he is good and has good pricing. Smittys engines and transmissions 989 213-7361 3241 Bradleyville Rd Vassar, MI 48768 The do it your self look...
  17. alldodge

    How can I make my Tracker 40 HP faster?

    Looks ok, can you fill in the other questions?
  18. alldodge

    Volvo Penta 5.7GXIC-J Misfiring/Black Smoke

    ^^ change this Take entire fuel system apart and clean Have injectors either cleaned and flowed tested (best) or run some injector cleaner thru each one on the bench. Connect under some pressure and energize the injector with 12V
Top