Search results

  1. nola mike

    Stern Drive transom lower right bolt fell out

    Oh yeah, there's a 0% chance of even accessing those bolts with the engine in, never mind doing any kind of repair or inspection
  2. nola mike

    AlphaOne Gen2 large gasket install

    Permatex is on every part in my boat
  3. nola mike

    Stern Drive transom lower right bolt fell out

    This was the case in mine. Transom had localized rot along both of the bolts. I was able to clean out the rot, fill the holes with epoxy and redrill. Although if I did it again I'd fill with 5200 instead.
  4. nola mike

    How do I troubleshoot the solar panel of my lift?

    Thank you, Chatgpt Where's the manual? I couldn't find a solar lift when I built mine, I'm curious about this one Op, you're getting voltage out of the panel, so you should be getting some charge. You can put an ammeter between the panel and battery to see what it's putting out. Then see if...
  5. nola mike

    Mercruiser decals

    I'm not going to check eBay for you but I'd be shocked if you can't find decals there
  6. nola mike

    Voltage low code 4602-32

    Isn't this boat brandy new and under warranty?
  7. nola mike

    This is one reason you lower the out drive...

    I've heard that people also have " trim gauges" that work. I think I had one of those once
  8. nola mike

    Voltage low code 4602-32

    Didn't know he was gone?
  9. nola mike

    Batteries not charging

    This is truly terrible advice. Anybody reading this, if you think that there aren't better ways to test your alternator (really, a multimeter between the alt output and ground)... there are. You can 100% fry an ECU doing this. Not as much of an issue in these engines, but don't generalize 1960's...
  10. nola mike

    Went electric

    Ah, a "free thinker", unconstrained by science 🙄
  11. nola mike

    Swap drives from one boat to another. How many day project?

    I used 4200 on the through bolts on mine, seems like a good place for water intrusion. Mine has localized transom rot around the bolts
  12. nola mike

    Batteries not charging

    Btw, don't do this on anything with electronics
  13. nola mike

    Went electric

    Seriously? Who is using portable generators to charge their cars? https://yaleclimateconnections.org/2022/08/electrifying-transportation-reduces-emissions-and-saves-massive-amounts-of-energy/ https://www.motortrend.com/news/evs-more-efficient-than-internal-combustion-engines/ Etc
  14. nola mike

    Went electric

    Yes, your thinking is akin to how goldfish think. More than one variable at play, which gets too complicated sometimes for some. An EV using nothing but coal fired electricity is still more efficient than an ICE.
  15. nola mike

    Went electric

    This whole tired "using dirty coal to get electricity" argument has been disproven so many times ...
  16. nola mike

    projects other than boats

    ECU? Guessing he won't be using no steenkin' ECU and harness.
  17. nola mike

    Changing Gear Ratios on Bravo 3

    I'm getting that as well
  18. nola mike

    4.3l mercruiser no start when hot

    But not when squirted down when pumping the throttle? That doesn't make sense, you're doing exactly the same thing. Just for fun maybe try to jump the fuel pump before starting next time.
  19. nola mike

    Boat lift maintenance

    You've got (at least) 2 grease nipples on the plate, looks like the bearings on the support pole are also greasable. Any grease is probably fine, I use regular moly grease. Cable should be lubricated with some light oil. The pulleys are a total guess but I'd use some light oil or spray lithium.
  20. nola mike

    4.3L Water Circulation Diagram

    There is a plug in the head, but Merc doesn't mention it in the winterization procedure. I've pulled it a couple of times after draining the rest of the block and the cavity has been dry. There's also a lot of space in there/room for expansion. I've left it in through quite a few hard freezes...
Top