Search results

  1. tpenfield

    Maybe my turn for new boat time

    Yes, the outboard versions are going to be a bit longer than the I/O versions, as the outboards are essentially 'added on' to the existing design in most cases. That may only matter as far as slip space, since you'd have to consider LOA. I do see more inventory on the market in general, so...
  2. tpenfield

    Quit My Job . . .

    I still have an Admiral that asks about all that stuff. Half the things I do now are just so I don't have to hear about it (again) :ROFLMAO:
  3. tpenfield

    Quit My Job . . .

    Yes, I figured for the seats alone (what I did) it would be about $15K worth of work. I've already been asked by a guy in CT who bought the Cruisers 328 that was in Falmouth, MA, about re-doing his seats. (He doesn't like the existing color Brown)
  4. tpenfield

    Quit My Job . . .

    Yes, I have quite a list. . . Re-engineer the fascia/soffits on the house. Paint the house Landscaping Clean out the garage Finish re-building my O'Day Mariner 19 (sailboat) Re-working the helm & controls on the Boston Whaler Landscaping trimming at the summer house . . .
  5. tpenfield

    Quit My Job . . .

    I decided over the weekend to quit my job. (The Admiral had recently suggested it). So, I went into to work today and did exactly that. 🤪 I think I'll hang out for a while, hopefully get some good boating time, and casually look for another job. . . . or not. :LOL: Maybe I can start doing...
  6. tpenfield

    Trailer Plates and buying boat hours away?

    I just used the plate from my other trailer . . . but don't tell anybody. 🤪 If it became an issue, my story would be that I am transferring the registration to the 'new' trailer. (which the DMV gives you a few days to complete) Make sure you have your insurance coverage in place and be careful.
  7. tpenfield

    Parking on incline

    Looks like you are parking the boat bow down? :unsure: Less than ideal, 'cuz you would want to drain any water out the transom plug. Bow down will tend to trap water in the hull. Any way that you can get the boat on a more level area so that you can raise the bow a bit? 2 jack stands are...
  8. tpenfield

    Boat Randomly Sluggish

    We all tend to gain weight as we age, and I'm wondering if the boat has done the same? :unsure: What you described is cavitation, which means the propeller is creating such low pressure on the back of the blades that the water turns into a gas (air) and the prop looses its grip. If the boat...
  9. tpenfield

    Peoples vs. Peoples/Gear weight limits?

    When the boat manufacturer certifies the boat for weight/people limits it really depends on how well the boat floats under load. I cannot exactly recall the process that is used to certify the boat, but different boats of similar size may vary a bit in their numbers. It won't be a constant...
  10. tpenfield

    How to tel if boat will over heat in the water

    It does not sound normal about removing the ground wire. Perhaps the ground wire is not actually a ground. Check it with your multimeter for 0 volts and low impedance to a known ground. 150˚ at idle may be fine, but the real test will be in the water under load. Running an engine on land...
  11. tpenfield

    Happiest Day of Ownership !!!

    In other news . . . I got the sea water strainers installed and have identified the remaining leak in the port engine cooling system (coolant side). Just got to figure out the best way to fix it.
  12. tpenfield

    Happiest Day of Ownership !!!

    This boat is heavy . . . . . . . as compared to my Formula 330. I am lifting the boat up off of the trailer a few inches in order to paint the bottom. I've got 10 boat stands lifting and it sure seems like a lot of work. . . . I'll have to figure out a better way of doing this for next...
  13. tpenfield

    Fuel economy of a 2000 Cobalt 226 454 mag mpi with bravo lll

    Welcome to iBoats . . . :D 2.5 MPG is my guess, based on what my 24 footer got for mileage. $24,856 is my market value guess :unsure: Check Bucvalue.com to see if they have an estimate for the boat.
  14. tpenfield

    Boat not running at full power

    +1 ^^^ There are so many things that it could be, you really need to narrow it down. Are you or you husband any good at mechanical stuff, engines, etc? If not it could be an extremely difficult process to take on your own.
  15. tpenfield

    Happy Birthday Scott Danforth

    Gosh darn it . . . I missed your birthday @Scott Danforth :oops: Is there any cake left? :unsure: I hope you had a great day, stay young.
  16. tpenfield

    Safety chains are hot?

    My new trailer has a wiring issue ( bad ground connection) and the only way to get the lights to work is to connect the safety chains. So, yes the chains can be the ground circuit if the wiring harness is not providing a ground. A quick test may be to see if the lights (and anything else...
  17. tpenfield

    Happiest Day of Ownership !!!

    Quick update . . . I power washed the hull and outdrives, so all is pretty much ready for AF painting. Struck out on installing sea water strainers (as noted in my Mercruiser thread), but got the pumps with new impellers installed. Sea water strainers to be continued . . . I am still chasing...
  18. tpenfield

    New Style Sea Water Pump - Impeller Change

    Quick Update . . . I am back to the drawing board on the sea water strainers, but the sea water pumps are in. A couple of issues . . . Starboard engine - not enough clearance under the engine for the strainer. Port engine - plenty of clearance, but the intake assembly is not too stiff to...
  19. tpenfield

    New Style Sea Water Pump - Impeller Change

    Their location (down in the bilge) is the biggest issue, and I would thing the crank-mounted pumps (Volvo) are better in that regard. One thing that I did notice was that the hose itself is very thick-walled and reinforced (because of its purpose), so it is nearly impossible to slide on/off the...
  20. tpenfield

    Pasty oil coming out the valve covers

    Welcome to iBoats. Don't eat the paste. :LOL: Sure has the signs of water in the oil, which may indicate a cracked engine block or the exhaust manifolds. What more can you tell us about this engine and its maintenance/winterization.
Top