Search results

  1. Lou C

    OMC Cobra Information

    well what did they mean by that? I'm just wondering why the original cast iron unit was changed since unless you are in salt water they last nearly indefinitely unless the engine wasn't winterized. There is nothing wrong with an aluminum intake as long as it is a marine unit that has brass...
  2. Lou C

    Only 4400 rpms on V6 4.3 2005 19P 3blades

    I’m wondering if the original drive was replaced at some point with one originally intended for a V8? In this case I’d think you might need a 17 or even 15 pitch prop….
  3. Lou C

    Only 4400 rpms on V6 4.3 2005 19P 3blades

    One benefit of the V6 in boats this size is fuel economy; I have found that with the Rochester Quadrajet 4bbl 90% of the time I’m running on the small primaries which give good low speed response and excellent fuel economy. But you still have the top end benefit of the huge secondaries; and the...
  4. Lou C

    Only 4400 rpms on V6 4.3 2005 19P 3blades

    I have a 15.5x15 on mine (1.62:1 drive ratio) and it will pull 5,000 or a bit more even WOT. While this definitely lowers top speed the more important result is that it reduces the strain in the engine every time it has to pull the boat up on plane. I’m willing to sacrifice top speed for better...
  5. Lou C

    OMC Cobra Information

    That's a Chevrolet 5.0 with a Holley 2bbl carb, nothing out of the ordinary about them, but if you anticipate freezing temps you must manually drain all the water out of the engine and exhaust system. There are two drains on the engine block, one on each side, lower midsection area, and each...
  6. Lou C

    Help find part number of OMC engine

    http://www.sterndrive.info/model_numbers.html This might help
  7. Lou C

    Help find part number of OMC engine

    Ok what part(s) do you need, many of them are the same for all years of Cobra production but some are not. OMC identified their products by model # which was for the whole power package (engine transom mount and outdrive) this model # is what you use to buy parts. In addition the drive has a...
  8. Lou C

    Fluid Changes for Winterizing, Do I Need to?

    Very interesing here we have the lemon law, they get 4 tries to fix a problem but there is some interpretation, in that the defect must impair function in some way, so things like minor blemishes or squeaks and rattles don't qualify but water leaks that cause rust, operational problems that...
  9. Lou C

    Help plz, 2002 3.0 mercruiser winterizing question

    now, about that paint job....J/k!
  10. Lou C

    Help plz, 2002 3.0 mercruiser winterizing question

    If you filled the exhaust manifold with AF that’s normal there are idle relief openings on the bottom of the transom mount where water exits when the engine is running. Now if it came out the bilge drain plug hole that might just be spillage.
  11. Lou C

    Fluid Changes for Winterizing, Do I Need to?

    I don’t think a once a year oil change should stress anyone out; keep in mind older carbed engines run cool and rich therefore fuel dilution of the oil is a real issue and this has also been a problem on modern 4 stroke outboards. Despite up to date fuel and ignition systems they run very cool...
  12. Lou C

    Fluid Changes for Winterizing, Do I Need to?

    I start it to check for leaks at the filter then fog & drain it
  13. Lou C

    Antifreeze circulation through engine

    Ah just saw your post, if that’s in the hose leading to the manifold from the thermostat housing I’d remove the housing and see what’s going on in there. If the intake looks really rotted right under the thermostat you may need to replace it. There is a water passage at the front of the intake...
  14. Lou C

    Antifreeze circulation through engine

    Is that from the engine block or the exhaust manifold? Either way that’s a LOT of rust flakes….I’ve been boating in salt water close to 20 years with the same boat and engine and never seen that many rust flakes when I winterized it. Salt water use? If from the block I’d remove the thermostat...
  15. Lou C

    Antifreeze circulation through engine

    PS I tried that way the first year I winterized and then thought to check the strength of the AF in the block, drained some into a paper cup and it looked like rusty water, did not seen to have any AF in it....so if you do this method it would be interesting to take a sample from one of the...
  16. Lou C

    Winterizing a 2004 3.0 glm-b

    you're welcome!
  17. Lou C

    Second Happiest Day . . .

    The one I have heard of people using here is Svensson's they are actually local to me, I patronize an auto parts store across the street from them! https://www.svenssonboattransport.com/
  18. Lou C

    Winterizing a 2004 3.0 glm-b

    That is correct, for freeze protection all you have to do is properly drain. The AF is only for added corrosion protection and probably unecessary in the fresh water Great Lakes. Here in salty LI Sound, we do it, lol! We also have to replace exhaust systems every 7 or seasons, which you probably...
  19. Lou C

    4.3 GXI hydraulic steering leak.

    that would be a nice easy solution. In my case it was the control valve leaking where it mates up to the hydraulic cylinder. Installed:
  20. Lou C

    Second Happiest Day . . .

    LI Sound when it gets windy or the wind is against the tides can get 'interesting', I only have ventured there on very calm days early in the day before the wind kicks up. Then there's the rest of the trip, Block Island Sound with the New London Ferry traffic, the Vineyard, etc. To me it looks...
Top