Search results

  1. Scott Danforth

    Can the base of engine work? Two to bolts under engine are rusted and can

    that will turn the motor over. to actually start it, you need power to the coil
  2. Scott Danforth

    Flushing port on 2012 VP 300 C-A

    if you are sure its a full system. I used to pull the impeller every year when I had to winterize. put the impeller, cover, screws and block drains in a baggie zip-tied with the keys to the steering wheel
  3. Scott Danforth

    Good service manual ‘67 evinrude ?? SELOC ?

    makes bad toilet paper and bad fire starting material may make a good knee pad if kneeling on gravel as far as a manual goes, not worth the paper they are printed on.
  4. Scott Danforth

    Mystery hose on Mercruiser 5.0 turns out to be AWESOME!!!

    My searay had a swivel snap connecting the drain plug to the end of the hose. never lost the plug (may have forgotten to install once or twice) and simply pulled the hose out. my Rogue has a keel drain that I use.
  5. Scott Danforth

    Flushing port on 2012 VP 300 C-A

    If you are hell-bound to not drain, then blow out the water first VP only does half systems, so unless you confirm that there is AF in the manifolds, I would drain them first.
  6. Scott Danforth

    Reattach cap to hull

    if it was done right, there wouldnt be a rebuild. however as an engineer, you understand design life.
  7. Scott Danforth

    Reattach cap to hull

    plexus would be permenant, however you would need a crew of people to drive in the screws before it sets.
  8. Scott Danforth

    1977 Baja on the cheap

    add $1500 to my estimate if you want to make the metal flake shiney. the plate on the transom means the transom is rotten
  9. Scott Danforth

    Checking for rot

    youre going to find lots of moisture in the transom and the stringers supporting the motors. SeaRays of that vintage are notorious for it.
  10. Scott Danforth

    do vintage Johnson red gas tank contain lead paint ?

    repaint the tank before you take it on the boat for your kids to eat the paint
  11. Scott Danforth

    Flushing port on 2012 VP 300 C-A

    No, it doesn't You must drain first. PERIOD You will never generate enough heat to open the thermostat and your block will still be filled with water even if you ran 250 gallons of AF thru the motor Pull the hoses, pull the plugs, drain the water
  12. Scott Danforth

    Flushing port on 2012 VP 300 C-A

    Why not follow the procedure in the factory manual?
  13. Scott Danforth

    Mystery hose on Mercruiser 5.0 turns out to be AWESOME!!!

    I warm the motor up on muffs, drop the hose thru the garboard plug. Then let all 8 qts drail while I change the filters, drink a beer or three
  14. Scott Danforth

    Flushing port on 2012 VP 300 C-A

    having the garden hose on supplies water. if you rev the motor over idle, it will suck air thru the drive
  15. Scott Danforth

    Fishing with Dad

    last few weeks have been dealing with RSV and other head colds, Mom's birthday, a hurricane or two weather is starting to get conducive to sanding off the old paint.
  16. Scott Danforth

    88 Capri Restoration (Splashed 08/2022)

    started one. https://forums.iboats.com/threads/fishing-with-dad.759932/
  17. Scott Danforth

    1977 Baja on the cheap

    FIRST, Welcome aboard Second, the motor and trailer may be worth the $300. they may not however you must assume that you will need to invest $3000 into the boat hull to make it seaworthy unless by chance you find a boat never exposed to moisture. remember, under the shiny and glittery...
  18. Scott Danforth

    Prop size info

    https://www.google.com/search?client=firefox-b-1-d&q=what+does+venting+a+prop+do
Top