Welcome
When a new member first post contains a link or vid, and then add to that the link/vid also doesn't pertain to the section or comment made, this gives some Mod's concern.
You posted in ribs but had a vid for your 380 cruiser.
Most first time members post a comment to another's...
I used one several years ago, didn't do very well. They were the rage at the lake some time ago, still see one every once in a while. There is a learning curve and need to relax which I didn't do it enough to get comfortable
This comes from a thread on the heavy equipment forum. Instead of finding the AF leak the "mechanic" which is now fired, wrote "If this light illuminates, add anti-freeze"
I have the vented type in both fireplaces, so you get more flame and not as efficient as ventless, but don't have to worry about moisture build up. The great room has a higher end one with a thermostat that controls, blower, flame height, lights, and temp.
It has 2 pipes that go up o the...
Alarm doesn't stop if just one motor is running, and you have tried it by running just port and then again just starboard?
If it actually was taking up to 10 seconds for alarm to go off then check the oil pressure with a mechanical gauge. It also shouldn't take increased revs to do so
Bats are...
No
All carbs are adjusted the same way and @racerone advise if I mis-speak
The carb should have a spec distance. Most are adjusted placing it upside down and measuring.
Don't just bend but make sure to bend tang in correct place
As example, the is a Rochester
I don't think the rudder leaning would cause the boat to list
Looking at the water line you can see the boat lit to starboard just sitting, so there is more weight on starboard side
I have not seen those type of tabs, don't even see what powers/moves them
The GXI-G had vortex heads so if the motor your buying has vortex heads the intake will bolt up (8 bolts)
The GXI-G comes with a 555 ECM, and if you can find someone which can reprogram it then you can use it, but that is the "if". Otherwise it's buying a used 555
The one on EBAY should be fine but note it says "remanufactured", this is someones old pump that they rebuilt. The issue will be is how well did they do it. It's not hard but still is an issue. I would want to see pics of the inside of pump and wear plate
Don't know if this can be done "easy"...
