Search results

  1. jerryjerry05

    Thermostat chaos!!!

    The year could be a 1969? This might be the part# F528068 or 18-3559 You might try Franz Marine he seems to have the parts lists for the older Chrysler.
  2. jerryjerry05

    Question about gear ratio

    Any idea what year the new gear box is from? Always include the year, model and serial numbers on the motor and what ever your working with??? Need the year for better answers.
  3. jerryjerry05

    OMC Cobra 2.3 model number

    https://www.boats.net/catalog/omc/stern-drive/2-30-liter/232bmrmef-1989 Here's the parts diagrams. I'll send you a PM as this site sometimes doesn't like to put others links here.
  4. jerryjerry05

    Force 125 lacking power

    Just one bolt??? Man did you get lucky!!!! The exhaust plate: It's famous for breaking bolts and being a real pain to reseal. If possible try to get the surfaces milled so they match up. If not, use lots of sealer.
  5. jerryjerry05

    Points Conversion to CDI

    Some people are thieves!! Ebay's full of them. I've got a box of old/NEW Chrysler parts. I'll put them on Ebay and retire in a day or 2 :) Post a pic of the parts you need or a part# and I'll see if it's in my box of parts. IF?? I have them I'll let you have them for shipping and a...
  6. jerryjerry05

    Force 70Hp 1991 charging issues

    otboardignitiondotcom has test procedures for lots of motors. Always include the year, model when asking questions. I find I get better results when I use an analog meter not the digital you show. It's still early I'm sure someone else will have different answers. The OEM and aftermarket parts...
  7. jerryjerry05

    Points Conversion to CDI

    The stator would be part of the new system.
  8. jerryjerry05

    1989 force 85hp loss of power

    The backfire or cough is from an air leak somewhere?? Possibly at the port cover gasket? If it starts, do the starting fluid test. Can of SF sprayed around the intake side of the motor. The area under the coils/packs is part of the intake, so is the base of the motor under the carbs. If...
  9. jerryjerry05

    55 hp Chrysler. Model 5551 has 3 piston rings

    I've never done it but some of the guys on here have done it. U-tube video's by FrankA or Frank Amcophora Frank put out a few good video's on the repairs of Chrysler/Force.
  10. jerryjerry05

    Points Conversion to CDI

    They started using Prestolite Ignition system in 1987/88 Look around and find a junker and use the system off that motor. If my memory's right? you'll need to drill/tap the trigger base(maybe) or you might be able to use the parts from the other motor.
  11. jerryjerry05

    Part identification

    Not sure of the name?? It's part of the ignition system. If you change the stator the new system will take that part out. Sorry I can't give more info.
  12. jerryjerry05

    Need advise on bringing a 92 beretta succsess 200 back to life.

    To rebuild the upper gear case you will need special tools. You might be ok to just replace the bearing, You'll need to get the factory service manual to be sure.
  13. jerryjerry05

    55 hp Chrysler. Model 5551 has 3 piston rings

    Look on the block for a foundry stamp. Under the power pack , maybe the coils or on the bottom of the intake manifold? there might be a foundry stamp. Usually a circle with a smaller circle that has a number in it. That number is the year the foundry produced the block.
  14. jerryjerry05

    Sport Craft 232 and Outdrive Trim Problem

    If you run green to ground and blue to positive and swap them around, you should get some reaction from the electric motor. If not??? then I'd guess the motors bad???
  15. jerryjerry05

    55 hp Chrysler. Model 5551 has 3 piston rings

    What book? Clymer/Seloc ?? they're famous for not having the right info? Any more #s on the tag inside the bottom cowl? Your motor might be a 1969 model and the older ones used 3 rings.
  16. jerryjerry05

    Force 70Hp 1991 gear problem

    Line up neutral on both and that should work.
  17. jerryjerry05

    Force 70Hp 1991 gear problem

    Did you remove the screw on the side of the nose cone? There's a drain plug and then the gear shift arm pin. If you removed the pin??? then the lower probably needs to broken down and the shift assy. reassembled on the prop shaft. . Just changing the impeller shouldn't change the shift?? You...
  18. jerryjerry05

    Carter Fuel pump

    Put the following # into Google(fuel pump 3853970 rebuild kit) A bunch of pumps shows up, I think one might fit? Here's the part # but it's NLA FUEL PUMP 3853970
  19. jerryjerry05

    Volov penta Dp290 trim rams rebuild

    There used to be a guy on another site marineenginedotcom that was real good with Volvo repairs. His name might have been Rick.
  20. jerryjerry05

    Top piston worth replacing? (120hp low compression)

    From the new pics??? I'd find a machine shop that can do the bore/hone job. Then pull it apart. IF??? there's ANY damage to the piston skirts I'd change the piston. Post piston pics after cleaning/removal. If it really is a fresh water motor?? it should come apart fairly easy. I just rebuilt the...
View older results
Top