Search results

  1. alldodge

    She just won't start easy nor stay running 4.3l

    We are way out into the twilight zone here or your not understanding what I'm talking about. Guessing we are not on same page The module is inside the Dizzy and is not the coil The module (item 6) comes out with 2 screws https://www.mercruiserparts.com/bam/subassembly/31511/2694/70
  2. alldodge

    She just won't start easy nor stay running 4.3l

    Puzzled, you sold the 3 wire sensor?
  3. alldodge

    Mercruiser 3.0 TKS - Hard to start when semi-cold

    A TKS, is a TKS , is a TKS only "differences are" jet size inside the carb Edit above
  4. alldodge

    Mercruiser 3.0 TKS - Hard to start when semi-cold

    TKS does not have a coil spring in a black plastic housing
  5. alldodge

    1992 Four Winns 5.8 No Start

    Having problems with the tach can also cause a no-start Disconnect the tach from the negative side of the coil and see if it will start
  6. alldodge

    Mercruiser 3.0 TKS - Hard to start when semi-cold

    I'm a bit confused with your first statement so I take it the motor has no problem starting up cold, it's only when it's been off for 2 to 3 hours. Another issue may be your starting procedure When cold the TKS module is retracted so when motor is cranked more fuel is drawn in. Once running...
  7. alldodge

    1994 Mercrusier 350 Mag ECT bravo closed cooling system

    Your list as ECT so you have a motor with (Cats) Catalytic converter in exhaust? When I first say the title noticed ECT and wondered if it did have Cats
  8. alldodge

    Evinrude Timing Tool

    closed GEY203X Read the rules
  9. alldodge

    How to find the best Doctor

    Have a neighbor with high iron and he has blood removed every so often to lower the level
  10. alldodge

    How to find the best Doctor

    The pic is prior to taking antibiotics and some swelling went done but not a lot. A fried who swears by essential oils gave her a spray bottle with Claraderm which is a mix of several oils. One spray and it started to burn a bit, Wife left it on maybe 1/2 hour and washed it off because her leg...
  11. alldodge

    5.0 MPI warm start issue

    Sierra or Carter is fine
  12. alldodge

    How to find the best Doctor

    Don't post any NAMES Question is for any Med professional but currently looking for Dermatologist. Previous Derm DR in Louisville we thought was great. Reason to leave him because we live 2.5 hours away. He found a couple spots on me and said they were beginning of Basal Cell but nothing needed...
  13. alldodge

    1994 Mercrusier 350 Mag ECT bravo closed cooling system

    Asking for the serial number because there can be many changes over time. Different parts mean possible different sources of the issue. All the info listed is helpful so we can start guessing but maybe our guess may be off because we don't know all the parts Guess It over heated enough to...
  14. alldodge

    1994 Mercrusier 350 Mag ECT bravo closed cooling system

    Serial number?
  15. alldodge

    She just won't start easy nor stay running 4.3l

    Being a 4.3 LH and not having a serial number the motor "should" have TBV ignition. Would know better with serial number TB4 or 5 has same troubleshooting chart Being TB ignition it might be the module, but test should verify. Does the module have 2 or 3 wires on it?
  16. alldodge

    MerCruiser update

    Fresh water only comment I'll add, there is no one I trust more around a marine motor more then you @muc but way before AF came into use for marine motors, folks always just drained and they were good for what ever winter thru at them. Agree good AF is better then no AF for long term. The...
  17. alldodge

    FELL Marine MOB+ Install

    Installed in my boat and it would not kill the starboard motor. Removed and did not reinstall Note: the documentation which comes with the unit states something to the effect it doesn't meet the requirements for a kill switch. I'm going to return at the same time to see if Merc will...
  18. alldodge

    Knock Sensor

    Is the wire long enough to move it to the other side of the block? The sensor will pick up a knock "if working" from either side. Some motors have a sensor on both sides I the early years of MPI the ECM would test the knock sensor each time the motor was started upon first throttle up, then...
  19. alldodge

    Knock Sensor

    Swap it around as ESG mentioned
  20. alldodge

    4200 vs 5200

    I wouldn't use 52, 42 will be fine, and in many cases no adhesive is needed. Tank is strapped in or foamed in so it's not moving
View older results
Top