Search results

  1. jerryjerry05

    Merc 97/225EFI

    I had it out and it ran ok.I went to start it and it started right up.For a couple of secomds and stalled and wouldn't start.The plugs were all oil fouled. Cleaned them and tried to start again.Same thing. I drained the vaporizer and it was full of oil, no gas just oil.The oil was from the oil...
  2. jerryjerry05

    97 225efi cps

    Hi all I've searched and can't find.What is the CPS clearance on this motor??? Thanks,J
  3. jerryjerry05

    96 Seadoo XP 800

    I don't have much experience with these.I can get a parts diagram on line.Where can I get a service manual on line? What is the tourqe on the head bolts? Why don't these have a regular head gasket? It has 25# difference in the compression readings??? What else should I be looking at...
  4. jerryjerry05

    Quirky 97 225EFI

    Hi all, I have a 97/225 EFI It starts and runs great. The pumps are both new. The filters and hoses and squeezie are all new.New stator. I start it and idle out to deeper water and then try to take off it bogs. I turn it off and restart then it will get right up on plane and run great . I slow...
  5. jerryjerry05

    Fuel injector Merc 97/225 EFI

    I need an exploded pic of a fuel injector.97 MercuryEFI 225hp Thanks, J
  6. jerryjerry05

    Mercury 225 EFI

    I need the Mercury vacume table for this motor. Also the procedures for testing coils.Thanks, J
  7. jerryjerry05

    Merc 225/EFI 1997

    I have a problem!! It starts and runs good at an idle.It runs up to 1700rpm then bogs like it aint getting fuel.The filters are clean,no water in the filters,the 1st pump has been rebuilt,the electric pump(in the vaporizer) works and it's filter is clean.It has 42# of pressure at any operating...
  8. jerryjerry05

    Honda 8hp 4 stroke

    I have a Honda 8hp.It has a 9 1/2 X 8 5/8 prop on it now.It was used on a Zodiak.I want to use it as a kicker on my fishing boat.I need to know what size does it come in.Any smaller pitch??? Thanks ,Jerry
  9. jerryjerry05

    97 Merc 225/EFI

    Hi all, I need the factory service manual for the fuel system.I really appreciate any help. Thanks Jerry jerryjerry05@bellsouth.net
  10. jerryjerry05

    Everyone read this

    The gasoline you buy now has ethanol and who knows what else mixed in. The ethanol will disolve the older rubber and it will screw up your fuel system. I've worked on quite a few motors that the ethanol has destroyed the fuel lines. It disolves the hoses and will clog filtersand carbs and cause...
  11. jerryjerry05

    Merc FariaTach

    I'm repowering and replacing the guages.The fuel guage is working along with the volt guage.The tach won't do anything.I have trie the dial on the back and it won't do anything and was wondering if there is a way to test a tach. Thanks Jerry
  12. jerryjerry05

    Merc 225

    I have a 21 CenterConsole Bayliner with Merc225.It had a pair of 85 Forces I removed them and replaced with the Merc. What prop should I start with?What other info do I need ? J
  13. jerryjerry05

    Honda 8hp 4 Stroke

    This is the model/ser# BZBC 1300945 What year??? I tried to buy an engine fuel coupler and they said the one I bought would fit the year I thought I had.Of course it didn't fit. Thanks J
  14. jerryjerry05

    Thanks for help 97 Merc

    I just wanted to say THANKS!!!! to CELL He helped me out with some wiring diagrams.He took his time to download and send different diagrams and is gonna send me the complete CD. I have been a contributor on this site for a while and it's guys like CELL that really make this site what it is...
  15. jerryjerry05

    97 Merc Wiring diagram

    I need a better wiring diagram.I bought a disc for the motor and the diagrams are almost impossible to read. It's a 97 225 EFI Thanks ,Jerry
  16. jerryjerry05

    Merc 7.5

    What year is this motor? Ser# 4315671 Thanks,Jerry
  17. jerryjerry05

    7.5 Merc Recoil

    My friend pulled his starter rope too far and now he can't get it to go back in. I told him I'd look at it after work today. ANY HELP?????? I have experience on small Chrysler/Force but not with Mercs. Thanks,Jerry It's a broken spring.J
  18. jerryjerry05

    Michigan Prop????????????

    Michigan prop with these #s G433 and SMC 378 W1037 It also says cup but I know what that means. Any idea as to the pitch? I'm pretty sure it came off a Mercruiser. Thanks Jerry
  19. jerryjerry05

    Honda Year???

    Honda: Mod# BF8A Ser#BZBC1300945 What year is this motor? Any help???? Thanks,J
  20. jerryjerry05

    Mercury vs Mercruiser

    I have had numerous I/Os and years of working on Force. I just re-powered my 21 with a 225 Mercury.I have a 19c Mercruiser prop and was wondering if there was a difference in outboard or I/O props. I put it on with the original thrust hub but it looked like the blades were real close to the...
Top