Search results

  1. alldodge

    serpentine belt

    Depends on the vintage of the motor, but usually no problems just cost money. Will need to change all the pulleys and brackets They make kits so look it up like at summitt racing. Might be able to find a bad motor and get stuff off it
  2. alldodge

    Alarm sound when turning the key - starter does not work.

    Really? Note the wire insulation jacket is deformed
  3. alldodge

    Lewmar 700 pro series anchor winch

    Agree in those issues there can be a major problem. I'm on a inland lake and therefore I put a shackle at the end. Maybe if on the ocean I would leave it off. With shackle off just put windless in free fall and the chain will run out faster then someone with a bad case of heresy squirts...
  4. alldodge

    Seeking Advice: Real-Time Bathymetry Solutions for a 25-Foot Boat

    Welcome Have heard of the system but never found someone that used it outside of marine biologists Hope someone here has used them and can advise
  5. alldodge

    Lewmar 700 pro series anchor winch

    I know this answer, you don't cut at least with mine, it was high tensile 1/4 inch. If ya had a 48 inch master key that would do it This happened to me twice, and I let out all chain, removed shackle off the end and let it fall. Came back next day with scuba tanks and reconnect
  6. alldodge

    Need Prop guy for Inboard - LI NY

    On Long Island https://www.bosslerandsweezey.com/ Long Island Propeller 1509 Rocky Point Rd, Middle Island, NY 11953, (631) 345-6295 S&S Propeller 2615 123rd St, Queens, NY 11354 (718) 359-3393
  7. alldodge

    Lewmar 700 pro series anchor winch

    And note this will be like putting a 100 pound person on the bow. Before you go with all chain get some sand bags or something similar and place it at the nose in the cabin. 1/4 chain weights .75 Lb per ft
  8. alldodge

    Lewmar 700 pro series anchor winch

    The issue isn't the grade it's the size of the links. Lewmar requires 1/4 ISO G4 or 1/4 BBB chain, used with 8 plait rode https://www.lewmar.com/Lewmar-Files/Manual_Pro-series-fish-manual-G3_B10414%20iss1.pdf Do you plan on splicing the rode to the chain? It can be done but needs a full...
  9. alldodge

    Force clamp screw bolt thread size?

    It's a Force OB, no metrics
  10. alldodge

    What rifle to scope for hunting?

    Your mixing comments. I don't want a class 3, never did
  11. alldodge

    Some questions regarding Jeanneau Leader 8

    No the duck bill valves are inside the toilet. Look at the parts breakdown
  12. alldodge

    Some questions regarding Jeanneau Leader 8

    All toilets have what's called duck bills, which are one way rubber valves. They allow stuff to be pump thru one way but should seal off for the return. If the duck bills leak then stuff comes back into bowl It could be your onboard holding tank is full and needs to be pump out. If your in...
  13. alldodge

    Some questions regarding Jeanneau Leader 8

    Will take a guess at the switches, seeing the boat is made in France. With master key listing Batteries/Breakers, This one turns main power ON Bord = Edge so maybe shore power Domestic = so maybe onboard Negatif = Negative in english, on/off grounds Moteur = Engine in english, on/off power...
  14. alldodge

    Out to lunch Gear Oil Prices

  15. alldodge

    Replacement Prop Selection

    That helps Type 3 blade Pitch can normally be found on the hub either actual pitch or part number which will provide the pitch Speed 32 MPH RPM 4000 Your motor can be one of 2 types being a 1989 model. Most would turn 4200-4600 RPM. If your motor has a roller cam (noted with block code CD...
  16. alldodge

    Replacement Prop Selection

    Need some numbers to determine props What type and pitch is on it now? Current WOT speed using GPS? Current WOT RPM?
  17. alldodge

    water pressure vs air pressure

    I use shop vac on AC condensate line every other year.
  18. alldodge

    Force clamp screw bolt thread size?

    Just to make sure we're talking the same thing, a 5/8 bolt will have a 3/4 hex head
  19. alldodge

    Lewmar 700 pro series anchor winch

    I've had a Formula 27PC with 125ft all chain, and currently have a 280 Chap with 15ft chain and 185ft of rode. The all chain never had an issue with it going up/down. The Mix seems to always have problems going up/down. The rode hangs going out and more so coming in. I cut off 50ft of rode...
  20. alldodge

    Lewmar 700 pro series anchor winch

    Think your issue will be is the anchor locker deep enough? Most need 12 inch drop to top when all rode and chain is loaded
Top