Search results

  1. Scott Danforth

    1989 Bayliner Trophy OMC 5.8L - Help with new boat

    your dealer, or right here https://www.iboats.com/shop/boat-engine-parts/boat-controls-steering/boat-controls/boat-control-cables.html
  2. Scott Danforth

    1989 Bayliner Trophy OMC 5.8L - Help with new boat

    Cables wear. They last about 15 years. Yours are 35 years old. Because of them being worn, you are loosing travel
  3. Scott Danforth

    MacBook Pro . . . Tragedy

    .45 round thru it?
  4. Scott Danforth

    1989 Bayliner Trophy OMC 5.8L - Help with new boat

    New cables
  5. Scott Danforth

    Taking the Dive on a 86 BR Limited

    A 38 year old boat will have issues lurking Suggest you get the factory manual for the motor
  6. Scott Danforth

    Glue for kneeboard pad

    Lowes
  7. Scott Danforth

    Stuck between pitch

    Check your tach. Valves float and cam curve runs out long before 6100 RPM
  8. Scott Danforth

    Glue for kneeboard pad

    Dap Weldwood contact cement
  9. Scott Danforth

    Heavy Oxidation Removal

    I did multiple threads depending what portion I was working on
  10. Scott Danforth

    First time pulling an engine questions

    Get the motor out (45 minute job) and then determine what is needed
  11. Scott Danforth

    First time pulling an engine questions

    What's to be confused about. It's a GM truck pan for 4x4 trucks with center drain vs side drain https://www.summitracing.com/parts/rnb-264-132?seid=srese1&gclid=CjwKCAjw5MOlBhBTEiwAAJ8e1ga2eWSlhIyrnfEiGh7EBzNWZhvxHz4zzjsmlPeD4DuLbAC-9iASjBoCR3UQAvD_BwE The adapter is screwed into the drain plug
  12. Scott Danforth

    1987 Volvo penta aq125a starting problems

    Have you serviced the points?
  13. Scott Danforth

    Spray from the outboard

    Rule of thumb is 1" up for every 4 " of setback
  14. Scott Danforth

    First time pulling an engine questions

    the dipstick tube should be routed to the drain.
  15. Scott Danforth

    Mercontrol Rewiring

    not much money to rewire it. switches available if you look.
  16. Scott Danforth

    Popped through the intake.

    If spraying with water causes it to run bad, start with dielectric grease in the plug wire boots. Water mist shouldn't cause it to run bad
  17. Scott Danforth

    Random overheat alarm 1998 Mercruiser 5.7

    I would look between the strainer and the drive to find your air leak. I would also invest in two pickup castings
  18. Scott Danforth

    First time pulling an engine questions

    You need 4 grade 8 3/8-16 bolts 3/4 inch longer than the tubes on your engine stand. You also need 4 hardened washers
  19. Scott Danforth

    Where to get alternator for Mercruiser?

    Thanks for letting us know
  20. Scott Danforth

    Repairing damaged floatation foam

    Only way to fix water logged foam is to remove it and replace it
Top