Search results

  1. R

    1995 90 HP

    You will be overjoyed with the way the computer runs the new motor.-----Instant starting / quiet operation.-----So if you can solve it with $$$$ you do not have any problems.
  2. R

    Temperature alarm goes off as soon as you turn on the ignition.

    I repeat.----The buzzer might be defective.
  3. R

    Temperature alarm goes off as soon as you turn on the ignition.

    No model # posted.----A wild guess is that buzzer is defective.-----
  4. R

    Fiberglass Question

    I think --stu----has made up his mind on how to fix this.
  5. R

    Saltwater corrosion = can't remove part

    Corrosion products-------In the presence of salt water and oxygen that white powder forms,-----Called aluminum oxide.-----So now there is more material in there ( oxygen ) that jams things up very , very tight.-----So heat can be used to expand the aluminum to loosen up the steel pin.-----Or...
  6. R

    Alarm in control box

    Still lots of folks ( and new owners ) who are not aware that an outboard needs a new impeller about every 3 years.
  7. R

    Assistance with 1984 8HP Evinrude

    There are no adjustments.-----Take gearcase apart.-----Dive in and see what is wrong.----Easy to see what is wrong !
  8. R

    Shift & Throttle cables

    Motor must be running when you shift it.----Or prop must be turned if motor is not running.
  9. R

    Johnson QD-15 Question

    ??--The main bearings on the 6 HP are bronze.----Never an issue at 50:1 on them !!
  10. R

    Assistance with 1984 8HP Evinrude

    Sorry----I guess I missed that you drained the oil !!----I do not believe there are any adjustments.----Good luck
  11. R

    1998 TRACKER PT175 "No compression"

    It could be a FORCE motor on that boat.-----No pictures or model , serial # was posted -.----Maybe I missed it.
  12. R

    Assistance with 1984 8HP Evinrude

    Drain gear oil first.
  13. R

    what is make and model?

    A nautical mile ( knot ) is equal to 1 minute of latitude.----Something found on a chart.
  14. R

    1997 50hp Johnson - techron issue?

    Try the correct starting procedure.--No need to push it in before cranking.-----Pump bulb tight / raise fast idle/ push key in / hold it in and crank it over !----Charge battery and have battery load tested.
  15. R

    1997 50hp Johnson - techron issue?

    Are you pushing the key in AND holding it in while cranking it over ??
  16. R

    2006 Johnson 9.9hp need help…

    Your local SUZUKI dealer may help with this motor.
  17. R

    Evinrude 40 HP WorkTwin Question

    Well----I can find that 40 listed for 1983.----But not the A model.------The A means nothing as far as parts are concerned.-----Not sure why you are confused by this.----They just did not sell many of these and only in certain markets.-----Your local friendly dealer ( if you still have one ) can...
  18. R

    1978 Evinrude 140 V4 Only firing on 2 cylinders

    Upper cylinder on starboard is #1
  19. R

    Starting Dry

    Starting a motor dry is a mistake.----Find out why your motor is not a reliable " always start " machine !!
  20. R

    1999 Johnson 25hp 3 cyl 2 stroke oil lines

    Those 3 cylinder 25 / 35 HP models use some wee oil recirculation lines on the port side of the block!!----And it is not covered in the manuals .----Hard to figure out by looking at the bare fittings.----And some are blocked from view by the powerpack.-----Have seen those wee lines pinched by...
Top