Search results

  1. alldodge

    2006 Volvo 5.7 osi-d crank no start

    Spark gap should be Blue or White and be able to jump 10mm. Spark should be constant and not intermittent. The tach showing 300 then there is signal. Not sure if CPS is doing this or the Cam sensor. The Cam sensor is on the Dizzy and may not have a cable connected to it. Check for 5V with...
  2. alldodge

    7.4 gen 6 nightmare

    The 5V circuit should be 5V exactly. If your meter is accurate then this will cause all kinds of issues. Fuel pressure should be 43 psi running. Dropping to 35 will not be enough to keep it running within spec. Disconnect the vacuum line at the regulator or plenum to see if pressure...
  3. alldodge

    2006 Volvo 5.7 osi-d crank no start

    Thanks for the number. Your motor doesn't have the VST as I think ripjmk was eluding to, it has the standard high and low pressure pumps Thinking your main issue is lack of spark. Could use the motor scanned for codes, but this would take a Techmate scanner or Rinda software. With cap and...
  4. alldodge

    2006 Volvo 5.7 osi-d crank no start

    Looks to e 4012106934 but it comes out to a GL-E so I'm missing something
  5. alldodge

    4.3 Vortec Swap

    Good deal
  6. alldodge

    2006 Volvo 5.7 osi-d crank no start

    NZ, love the place was only there once in 1976, great people How about the motor serial number? Your flooding and something is causing to much fuel to enter
  7. alldodge

    Mercruiser ECM replacement?

    Looks like 4 bots on each side of intake, and if so that's a vortec
  8. alldodge

    Mercruiser ECM replacement?

    If there is a "1" which starts off the number then its 10243880...350...95-00...2 or 4...Vortec truck, Gen.I crate motors and "ZZ4", roller cam, one piece rear seal It would be a roller cam with vortec heads
  9. alldodge

    A mercruiser 4.3l MPI with a low weak idle hard to start

    With the IAC at 99% the ECM is trying to increase the rpm. Your compression is low if you gauge is accurate What does the MAP and Temp show? Does it get better when the motor warms up or stay the same?
  10. alldodge

    4.3GL-D Issue

    The ALT is passing voltage on the green wire and has an issue. It should pass voltage only when running thru the diode (item 23)
  11. alldodge

    Electric power steering

    Just joined, I'm on several other Mopar but they are all the truck types
  12. alldodge

    Electric power steering

    Thanks
  13. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Just like a few kids on Christmas, start taking the toy apart before you ever played with it :ROFLMAO: :cool:
  14. alldodge

    Electric power steering

    He says its a bit erratic. Happens when stopped getting ready to turn and also sometimes like when pulling into parking space. Seems to have more difficulty "sometimes" when turning right then left, but does it both ways. I'm sure its a sensor and its not energizing the relay that turns on...
  15. alldodge

    Electric power steering

    That makes me want to laugh but mostly cry He doesn't have any money, why I try to figure it out to help. Long story but being 40 years old hasn't helped
  16. alldodge

    Phase Combiner + Being Bored

    Keep thinking about one of T hose myself Good think is propane last a really long time
  17. alldodge

    Electric power steering

    Right there with ya Joe, I know belt driven but not the electric. There is a relay which turns it on/off (so is my understanding) and it happens at low only. So is the relay working or not, I don't know. Figure ask questions and maybe some young'ens will come and tell us old folks how to test it
  18. alldodge

    Electric power steering

    2013 dodge charger, sons car Car was hit a few years ago on right front fender by a deer. The electric power steering pump is behind the fender. When motor is idling the steering can go stiff (hard to turn) but give it a slight bit of gas, and all is good. Fluid level is ok, so I'm thinking...
  19. alldodge

    Phase Combiner + Being Bored

    Find a marine 1800 rpm Gen instead of the 3600 rpm ones. They are not as loud
  20. alldodge

    Cleaning up a Regal Commodore 292

    Being a 2000 model I don't see nema interfacing with the motors Serial numbers would verify, but still pretty sure its a no-go
Top