Search results

  1. Scott Danforth

    Wix filter cross reference for VP 4.3?

    use it as a binary switch...... no problem
  2. Scott Danforth

    Purpose of material under fuel tank in aluminum boat?

    originally paper was allowed to be used as an abrasion guard. however kraft paper is effectively 2000 grit sand paper and it wore thru the tanks Follow the new regs on using rubber. I have used epdm sheets from mcmaster carr and in one instance, conveyor belt material from the local co-op
  3. Scott Danforth

    Mercruiser Alpha One will not trim up, no sound

    I also have a feeling you will need to read links 14, 15, 18, 2, 3, 4a, and 4b https://forums.iboats.com/threads/how-tos-and-other-great-information.283508/
  4. Scott Danforth

    090 block dipstick tube pressed in?

    If the dipstick is in the block, it's a press fit. I have a pair of vice grips I modified to clamp on the tube to pound in with a hammer
  5. Scott Danforth

    MerCruiser 5.0 MPI pinging/detonation at higher RPMs

    Pinging is either bad fuel, running lean or bad timing The crab caps last about a year. They cross - fire and that detonation is eating your engine
  6. Scott Danforth

    Mercruiser Alpha One will not trim up, no sound

    First, welcome aboard Second, I always recommend an aluminum boat and an outboard for a first time boat Third fiberglass boats with trashed interiors usually have hull rot issues Regarding your trim. Start at the battery and clean every connection until you get to the bow light. By clean...
  7. Scott Danforth

    Speed after adding 3rd log

    I would get a center transom tube and look for more motor
  8. Scott Danforth

    VP 280 Transom Plate Removal

    The clamp is a pressed fit over the PDS and is drawn on with the 6 bolts. Removal usually requires tension on all 3 jacking bolts to make it pop off Regarding a manual, I would have to call a VP dealer as the VP website no longer lists manuals older than 20 years
  9. Scott Danforth

    VP 280 Transom Plate Removal

    So you have 2 knee pads coming? Buy a used clamp off eBay. Use a drill and chisel and split the old clamp
  10. Scott Danforth

    Speed after adding 3rd log

    Add lifting strakes
  11. Scott Danforth

    LED interior lights

    yes, red lamps are better for night visibility and blue is the worst color
  12. Scott Danforth

    Can I replace a Mercruiser 5.0L with a 4.5L engine?

    First, Welcome aboard Second, the most power from a 5.0 was 260hp out of the 5.0 MPI. the most power from the 5.7 liter was 300hp, the most hp out of the 6.2 liter from mercury is 320hp. 350 hp is non mercury small block or big block territory. the 4.5 is a V6 producing 250 hp. however if...
  13. Scott Danforth

    2011 MERCURY 4.3L TKS - QUESTION

    @QBhoy Coming from a racing background. I only look at the analog gauges. On individual gauge installs I usually rotate the gauges so the oil pressure and engine temp are pointed vertical when operating Most sensors used on "digital" data such as oil pressure, engine temp, air temp, fuel...
  14. Scott Danforth

    2011 MERCURY 4.3L TKS - QUESTION

    You can add a Maretron kit and extra sensors..... But why?
  15. Scott Danforth

    Transom removal on SX

    Volvo Penta sells Volvo Penta manuals
  16. Scott Danforth

    VP 280 Transom Plate Removal

    Those bolts have nearly full threads. eBay or direct from VP. After you get it cleaned up. Use permatex aviation sealant on the threads to prevent corrosion
  17. Scott Danforth

    Random

    Hey, looks like @mickyryan and I playing hide-n-seek. #famineproof
  18. Scott Danforth

    Volvo oil pressure reads 80 psi all times

    FWIW, check the ground to the gauge also, I have a mechanical gauge installed on the engine and the electric gauge in the dash. both read pressure, however the electric one reads about 25% high. I have the low oil pressure switch to kill ignition and fuel should my pressure drop below 7psi
  19. Scott Danforth

    VP 280 Transom Plate Removal

    yes get the manual there are 6 thru-holes that you currently have bolts in. under the washer plates are 3 tapped holes the same threads as the bolts. you take out the 6 bolts, lube up 3 and stick in the 3 threaded holes. then tighten the 3 bolts evenly to jack the clamp off. otherwise it...
  20. Scott Danforth

    Help with a 1992 Mercury 2 stroke

    check the fuel pump. you may need to rebuild the carb dont forget to put in a water pump
Top