Search results

  1. R

    Did the 77 9.9's have a tell tale, CDI, reed spacers and round exhaust yet ?

    Visit-----evinrudeparts.ca----and other sites.-----It will be clear if you do some research.
  2. R

    1947 Sea King 2 stroke 5hp

    Set maximum gap to 0.020"
  3. R

    1947 Sea King 2 stroke 5hp

    That was made by Johnson / Evinrude.------Visit ----aomci----Lots of folks will have these breaker sets.-----Should be easy to find.
  4. R

    Is there anyone on here with experience rebuilding Yamaha 2 strokes?

    Good luck with your project
  5. R

    1988 force 35 hp

    The parts book shows a wire like that as it came out of the factory.
  6. R

    1947 Sea King 2 stroke 5hp

    Post picture of motor and broken part.
  7. R

    Is there anyone on here with experience rebuilding Yamaha 2 strokes?

    It is just parts and pieces.----Some have a multi piece crankshaft that requires special tools.----If you post specific information such as the nature of the problem it will help you.----Or what tools and experience do you have ?----What motor do you have ?
  8. R

    Lower unit filled with grease

    Every dealer I have talked to has said----" throw it away as far as you can "------Not a very reliable unit !----Take a reading on the orange wires going under the flywheel.----What ohms on orange to orange ?
  9. R

    Fuel pickup problem...

    Screen on the end could be plugged.----Or pick-up tube might be cracked or have a hole in it.
  10. R

    2.3 timing belt

    Missed the part about there being more than 1 version of the 2.3 motor.
  11. R

    225 ocean pro (won't start)

    That thing with the red lever is the primer valve.---The red lever is for manual operation of the valve.----The red lever should be in line with the valve body for running.----This primer valve replaces old time choke flapper plates.----Check it and make sure the primer valve is opening when...
  12. R

    1973 johnson 25hp 25R73A

    Remove bypass covers and inspect rings.---Use small screw driver to push on them and see if they spring back / are loose in the grooves.----They may be jammed with carbon / corrosion.
  13. R

    Firing up remote control Johnson big twin 40 ( super Seahorse )

    Primer bulbs appear to be confusing many folks.----They are nothing but a simple pump.-----Run carburetor empty after use.----Then on start up you operate the primer.-----It MUST move some fuel by feel.----Then go hard.-----That way you test the bulb / float valve / fuel tank / hose each time...
  14. R

    2.3 timing belt

    Ford automotive seems to show a chain.-----Not sure if there is a conversion kit.
  15. R

    2.3 timing belt

    Timing belt is listed as available for about $50 in one marine place.----Automotive appears to show a chain for 1990 ????
  16. R

    2.3 timing belt

    You would find that timing belt at your local for dealer I believe.
  17. R

    Lower unit filled with grease

    Does this motor still have the automatic oiler / oil tank installed ?----If so it should be removed and thrown away.----Then mix at 50:1 in your fuel tank.-----The ignition parts are big $$ items.----Do you have an ohmmeter ?
  18. R

    starter motor help

    Look for a private message.----You need a starter from a 1965 to 1970 model 33 HP or 1965 to 1976 model 40 HP .----And sorry ---sometimes the sellers will always tell you everything fits !
  19. R

    Bowriders that handle waves well?

    Post #1 did not mention Ocean-----It says rougher water !-----I would not own a bowrider myself !
  20. R

    Bowriders that handle waves well?

    I would not take a bow rider out where there are big waves.-----Bilge pumps are not big enuff.
Top