Search results

  1. alldodge

    NEW Transom seal BAD!!!

    Agree
  2. alldodge

    Have a 1979 Chrysler Conqorer - where to find a original style rear seat?

    Not off hand but can go out a measure. My boat is a tad different, but you could just measure how wide your boat is and find one that fits
  3. alldodge

    NEW Transom seal BAD!!!

    Good post but this is a VP right ?
  4. alldodge

    Have a 1979 Chrysler Conqorer - where to find a original style rear seat?

    I just sits on the deck. Nothing secures it to the deck. The aluminum bar is used to keep seat straight up when its slide out of the way to get at the gas tanks Hope to have mine ready to go this fall
  5. alldodge

    Mercruiser 4,3 MPI from 2008, intermittent alarm after 3500 rpm??

    There are faults for Oil pressure open or short which then defaults to 50.7 psi and has a 2 beeps per minute I'm not seeing an alarm going off for 67 psi, or even 87. It is a bit high for a stock motor seeing 87, but the ECM doesn't see the 87 or the 67 and I don't see an issue Did you...
  6. alldodge

    Want to make underwater removable hardware - West Epoxy with 404?

    I would suggest, drill out large enough so all the wood is dry. Fill with MarineTex or epoxy resin. When dry, drill for screw and use 3M 4000
  7. alldodge

    Mercruiser 4,3 MPI from 2008, intermittent alarm after 3500 rpm??

    Are we still discussing an intermittent alarm or high oil pressure?
  8. alldodge

    Help Diagnosing carb vs ignition problem, 5.7 mercruiser

    Not me, No, I think one motor has more compression or better fuel delivery then the other I short, my opinion is your Mech replaced some parts not really understanding what the problem was. When the parts didn't fix the issue and the problem was found (antisiphon valve) then he is trying to...
  9. alldodge

    Mercruiser 6.2 showing high water pressure

    My thought on water pressure sensors, they vacuum (so to speak) There is no reason what so ever to have one other then to cause problems with anything other then "maybe" a CAT motor If my temp was running good, and so long as there is not issue(s) with the ECM throwing codes. Leave the sensor...
  10. alldodge

    4.3l over heats on plane

    There should be very little if any rtv. Where the impeller rides against the sides is the most important. There should be no groves
  11. alldodge

    40amp vs 50amp Fuse

    Put it this way. You can put a 100 amp fuse in line and a 40 amp. The 40 amp will blow first
  12. alldodge

    40amp vs 50amp Fuse

    If the fuse is for the charger then I see no issue with a 40 amp
  13. alldodge

    1993 5.0 Cobra EFI Alternator/Electrical Question

    My diagram is from a Ford 5.0 and 5.8 All (GM, FORD, Idmar , etc) ALT's except one wire ALT's use both a Sence and a Excite lead. The one wire types have both connections made internally. Don't know about your diagram so I'm unsure if it was left off because it was missed or something else...
  14. alldodge

    4.3 L Mercruser

    OK SN shows TBV ignition and TKS carb Yes you can remove wires one at a time to see if there is equal change. If one cylinder shows more change then others, I would do a compression test first. May not be a problem
  15. alldodge

    4.3l over heats on plane

    Looks like a 4 cyl 3.0 not a 6 cyl 4.3 In any case, has the raw water pump impeller been replaced?
  16. alldodge

    1993 5.0 Cobra EFI Alternator/Electrical Question

    Put a jumper between S and EX
  17. alldodge

    Have a 1979 Chrysler Conqorer - where to find a original style rear seat?

    I'm out of town but will try to remember to get some pics. As before its a pretty simple design and you should be able to make one
  18. alldodge

    Have a 1979 Chrysler Conqorer - where to find a original style rear seat?

    Nice ride I'm not selling and have one (105 model), but there isn't much to them. One of these days I'm going to take mine and have it reupholstered. Need to get a Chrysler motor for the ride to make it complete https://forums.iboats.com/attachments/photo682-jpg.214783/
  19. alldodge

    Getting out of the boat

    Agree, and Hate talking about power loading (I understand the issues and sorry) but, there is no way I'm cranking my 11,000 pound boat up on the trailer, and its not illegal where I boat
  20. alldodge

    1993 5.0 Cobra EFI Alternator/Electrical Question

    No worries, Im old and get cranky
Top