Search results

  1. R

    Proper spark plug wire length for 93 evinrude 48 spl (e48eslete)

    Are they solid wire core ?-----Just make them so they fit nice.----Nothing special.------Are there issues with the running of the motor ?----If so what trouble shooting has been done ?
  2. R

    Brand new 9.9hp mercury 4 stroke won't start

    Your dealer will fix it under warranty.----Or show you how to run / operate the motor.-----What motor did you have before this one.-----You did buy from your local dealer I hope.------Most dealers will take the time to show a novice the ins / out of boat motors.
  3. R

    Brand new 9.9hp mercury 4 stroke won't start

    Is the kill switch turned to the on / run position ????
  4. R

    1991 Stratos Javelin 363 FS

    Contact dealer or factory for information on fused bus bar.
  5. R

    $2500 boat

    Another wild idea from a space cadet.-------Fabricate a bracket using the motor mount.-----Use the bracket to hold a rubber gasket / RTV over your repair area with a backing plate .----Make the plate from say 3/16" and extend it by 1" all around your repair area.----Might work and nobody will...
  6. R

    75 HP Honda running horribly

    Clean and inspect vapor separator tank / filters / float valve.
  7. R

    75 HP Honda running horribly

    No model # posted.----Some use a cam driven lift pump and a high pressure electric pump.------Fuel injected I think , so check all filters.----Check vapor separating tank ( if equipped ) with it.
  8. R

    break in

    My opinion only.------Manufacturing today is computer controlled.-----Robot machines finish parts to exacting standards.------Break in today is not as critical as it was 50 years ago.
  9. R

    1991 Stratos Javelin 363 FS

    That switch might turn power on the a fused bus bar.-----Switch it to on and see what happens.
  10. R

    75 HP Honda running horribly

    Test running with another tank would indicate if there is an issue with boat fuel tank or whether issue is something on the motor.
  11. R

    75 HP Honda running horribly

    Test run with a portable tank and hose.
  12. R

    $2500 boat

    Post #23 says it was ---" cleaned it up real good "----So it will be good for years.
  13. R

    64 Johnson 9.5 “Turtle Motor”

    Test run the motor with water about 6" above the impeller.
  14. R

    1975 Mercury 650 blue band - Abandoned, but brought back home

    Pull starter apart for inspection and testing.-----Not sure how then ask.----Don't spend any beer tokens until you determine condition this engine-----If water got inside and on crankshaft bearings it could all be scrap.
  15. R

    64 Johnson 9.5 “Turtle Motor”

    There should be no visible water leaks under the cowing.----Since I can not see your motor you can post pictures.-----There is a rubber exhaust hose from block to the cowling.----Is it in place ?----Pictures or clear explanations can help you.-----Have about 10 of these 9.5 models so they are...
  16. R

    Evinrude Mate 2 HP Driveshaft

    In Ontario----evinrudeparts.ca-----Might help you.
  17. R

    64 Johnson 9.5 “Turtle Motor”

    There is a spot on the recoil where it could leak. ---Easy fix for that gasket.----Explain where it is leaking.
  18. R

    1978 Evinrude 150

    On a 45 year old motor like that the first thing is a compression test.-----Post your numbers here.-----These motors were famous for broken piston rings.-----I know that this has nothing to do with spark.-----But those results are good for future reference.---If starter cranks slow there will...
  19. R

    64 Johnson 9.5 “Turtle Motor”

    Not true.----When the motor is running in neutral it pumps plenty of water !-----A common mistake is not enuff water in the test bucket.-----Water must be 8" above the pump.
  20. R

    1995 Mercury 40hp 4cyl - sputters and eventually dies at idle under load

    They made THOUSANDS of that style 4 cylinder over the years.----I have a 1962 model in the back of my truck.---A 1954 model apart on the shelf.------Did you replace carburetor floats ?------Did you replace water pump impeller every 2 / 3 years ?-----Made sure exhaust housing is not plugged...
Top