Search results

  1. alldodge

    Oil Filter Housing Question

    The pic in post 9 is the remote oil adapter. I also removed the center fitting because I was going to install a high flow remote filter head. For normal remote filter heads the fitting is not removed. The fitting is also not removed to just install an oil filter directly on the block. Also...
  2. alldodge

    Oil Filter Housing Question

    Don't know what type or brand the adapter is, but I would not use it. As for the gasket it comes on the oil filter Here is mine before removing the center piece only. The screws which are on the sides but are only used when a remote adapter is used. Note the plug which yours should not have...
  3. alldodge

    The dreaded second battery thread

    First you have to disconnect the stereo and amp from Bat 1 (Start)and the key switch. Those items need to be connected from a feed coming from Bat 2 (House). While you can use the same ground, it is best to add additional ground wire up to the amp and stereo. Have both Bats connected together...
  4. alldodge

    Water Pressure Gauge Tubing

    Will be installing a 40 PSI water pressure gauge on the block this season. Could use the typical 1/8 OD tubing but its typically -5 to 125 degrees F, for ice maker stuff, -5 to 175F for auto stuff, and -60 to 200F for shore D:70 stuff. The shore D:70 is fairly stiff so this probably won't...
  5. alldodge

    fuel injector stuck open

    I'm not finding that part number for the PCM, finding 8M0072021 and cost is 1627.38 at BAM That said its not your injector, but the connection to it. The multiport injected motor fires 4 injectors, then 4 others at the same time for a given length on time. As speed increases of decreases the...
  6. alldodge

    Pic Test

    Thanks but just installed chrome and looks like I'm back in pictures again
  7. alldodge

    Merc Bravo water pressure

    Wondering what the max pressure that could be seen for or a standard Merc belt driven pump for open cooled system, and measured at the block? Will be installing a mechanical gauge in the block for next season and looking at VDO 30 or 40 PSI gauge. Anyone have one installed and know what could...
  8. alldodge

    Post messages not displaying

    Either the post are being deleted with no signs of post being edited, or some members are not showing up. As an example, porscheguy and QBhoy are missing https://forums.iboats.com/forum/gene...erc-v8-re-prop
  9. alldodge

    HNY and Hope all winterizations were done correctly

    Every year we all read threads about folks having cracked blocks from bad winterizations. With it being so cold for so long I'm thinking the numbers may go up, hoping they do not. In any case Happy New Year and may it be a safe one for you and yours, and there will be no issues come spring
  10. alldodge

    Chrysler 130

    Using the wife's computer to post pics
  11. alldodge

    Hope the Heat is Keeping UP

    Installed a new 16 seer heat pump this summer, and with the temps dropping below 30F the heat pump would be going into electric coil mode. Good thing also installed 2 vented propane gas logs. Turned HP down to 66 and the logs to 68. This way the HP does not turn on and the logs take over...
  12. alldodge

    Pergo Flooring

    Installed 1000 sq ft of Pergo flooring. This was the 10yr commerical and lifetime residential. Putting it in a possible rental house and liked the idea its American made and can have water stand on it for 24 hours without a problem. Floor went down pretty well and pleased with the out come...
  13. alldodge

    new iboats site

    try with a windows vista and Fire fox Well made if further but said pic was to large, so try again Edit: must be something with my laptop or the site has security issue. This is the wifes computer and she has all kinds of crud on it, and I try never to use it. Waiting or her so I can install...
  14. alldodge

    Suzuki df150 getting fat

    Good looking boat, but think I would insist on it coming with a prop :D :rolleyes:
  15. alldodge

    Chrysler 130

    Keep look for another motor or block to replace my 105. Frank told me I could use a 105 (original) 120 or Force 120 and change my cowling so long as it was before 1994. Found a boat and motor on CL but guy says compression is 132 across the board (skeptical) and its a mid 80's motor. I didn't...
  16. alldodge

    Pintle Hitch

    Over the years I have accumulated all kinds of hitch balls (pun intended). Have the straight 3-way, a couple 2 5/16, variations of 2 inch drops and picked up a pintle hitch some years back when needing a 10 ton Tag trailer. Was out today moving the Tag trailer and an empty cruiser trailer to...
  17. alldodge

    Fuel Pump/Pressure Problem Or Something Else? TIGE Mercruiser Magnum 454 EFI

    No, you test high pressure on the fuel rail at the shrader valve which is under the intake plenum. Removing the top lets you see if there is any crud building up. The high pressure pump can be lifted out to have a look
  18. alldodge

    Volvo AD41P RPM Issue

    Not saying your wrong, but in all fairness, the only place I've ever seen CAC has been with VP. Been on the Heavy Equipment Forum for as long as here and never seen it, all call them inner coolers. Most cases for low rpm in these motors is clogged exhaust, turbo or fuel pressure. Running...
  19. alldodge

    Fuel Pump/Pressure Problem Or Something Else? TIGE Mercruiser Magnum 454 EFI

    The motor says EFI but this is an MPI motor. The air intake plenum is only used on MPI. The EFI uses a Throttle Body Injection and sits on the intake where the carb would be, looks like this Here is the connections to the VST. In this case your mechanical fuel pump may be mounted on top...
  20. alldodge

    How to install dual battery

    Agree with add a battery, and what is the second bat going to be used for? Also install a battery switch or relay so it can be used to combine the bat's for starting if needed
Top