Search results

  1. Scott Danforth

    oil pan gasket

    im not finding a one-piece gasket from Fel-Pro for the 1990 and older 2.5/3.0 however I am sure one exists.
  2. Scott Danforth

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    did the DXF's help?
  3. Scott Danforth

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Latdy emailed me and said she recognized the logo. glad I could help
  4. Scott Danforth

    Need towing advice

    I would buy a proper trailer, then sell it.
  5. Scott Danforth

    1995 OMC 5.0L motor oil question

    Ooooh.....another oil thread
  6. Scott Danforth

    Mercruiser 3.7 (470) wont turn all the way

    If you have to replace the push rod, you need the exact length
  7. Scott Danforth

    Steering Wheel Removal & Repair

    Depends. Some are snapped on (give a squeeze), some are held in with screws. Without being there to see, I would ve guessing
  8. Scott Danforth

    Forgot to trim up while jacking up trailer

    outdrives are designed to lift the entire boat out of the water by the prop. so as stated above, if you havent bent the skeg, you only partially loaded it. your fine.
  9. Scott Danforth

    Inboard Engine Cover is Really Heavy

    under a shelter is only marginally better than in a garage. moist air leads to rotten wood got pics?
  10. Scott Danforth

    228 oil pan/timing cover leak

    start your own thread. the 3.0 is nothing like the 228 that the OP has
  11. Scott Danforth

    5.7l carburetor choices

    Quick Fuel is the low $ version of holley. However for a mercruiser install, I would do an edelbrock because the throttle brackets fit.
  12. Scott Danforth

    Steering Wheel Removal & Repair

    Nearly every boat steering wheel is held to a tapered shaft on the helm with a nut under the center cap
  13. Scott Danforth

    5.7l carburetor choices

    Volvo used 715 cfm holleys on the 275hp and 280hp 350s
  14. Scott Danforth

    228 oil pan/timing cover leak

    Suggest always starting your own thread. Hoewever yes, if you have an sbc, felpro makes a single gasket for both the 1-piece RMS and 2-piece RMS blocks
  15. Scott Danforth

    one engine in 370 Alcan looses power after running short time

    what is the fuel pressure? most likely a boat side fuel system issue. however with new engines, you do get new engine support from VP
  16. Scott Danforth

    1988 Rogue 2420

    Thanks. since fuel and water are on the starboard side, I made the assumption that the shore power should go there. however thought I would ask.
  17. Scott Danforth

    Harmonic Balancer bolt thread/size for removal.

    yes, imperial. should be 5/16-18 or 3/8-16
  18. Scott Danforth

    1988 Rogue 2420

    what was the failure mode. on the same topic, is your shore power receptacle on the port side or starboard?
  19. Scott Danforth

    2021 Splash of the Year Voting

    Holiday belly bump
  20. Scott Danforth

    Inboard Engine Cover is Really Heavy

    Engine cover should be fiberglass
Top