Search results

  1. alldodge

    Cobalt Steering Wheel Removal

    Maybe whole center triangle piece might come off, don't know. Are there any screws behind the wheel?
  2. alldodge

    Black Scorpion 5.7 / Thunderbolt V coil wire

    I took the range of serial numbers and looked them up at Mercury marine website. Mercury site list serial number 0M317000 thru 0W689999, which I started with 0M3317000, 391600 and a few more going higher. All serial numbers are showing the HVS distributer. I'm still thinking someone had...
  3. alldodge

    1966 mercruiser 120hp temp sending unit

    Don't have one for a 120 but do have one for the inline 6, and it should be pretty close And there is also boatinfo http://boatinfo.no/lib/mercruiser/manuals/mercruiser1.html#/248
  4. alldodge

    Bravo 3, gear lube leak, Mecruiser 350 Mag MPI,

    Could use a drive serial number to see if there is any bulletins out about it, but my first guess is the bearings and/or races are worn. Think your dealing with someone which knows how to replace parts but does not know how to analyze what the issue is
  5. alldodge

    DELCO VOYAGER PROBLEMS

    Just as I said, the rotation is CW, so before it comes to TDC (12 o'clock) it will be passing 6, 5, 4 ,3 ,2 ,1 then 12. So as it passes 1 or 2 this is before TDC
  6. alldodge

    DELCO VOYAGER PROBLEMS

    I don't think you have an issue. The motor is a Left Hand (LH) rotation motor which is RH at the front. When timing advances the advance goes more clockwise (RH) which starts the firing of the plugs sooner. Looking at a timing light it goes more to the right
  7. alldodge

    2 bbl Mercarb accelerator pump

    I would take it apart and clean it. Putting the cleaner in it may help, and may even fix for now. In most cases it just postpones the issue. It could be the check valve in the bottom which is hanging and not allowing enough fuel to be drawn in. This is a Rochester but the workings are the...
  8. alldodge

    Another question on 2003 5.0 gxi remote oil filter and oil bypass valve

    All depends if your using a filter with ah anti drain back valve (check valve). The best case is to make sure and not hook it up backwards.
  9. alldodge

    72 Thunderbird Formula w/twin 165hp Mercs

    The needle seat leak isn't bad and may fix it self over time, but right now should do no harm. Do need to get the oil pressure switch fixed next year. Don't remember if you have handle controls or panel. This is panel but handle works the same way. When power is applied to the Blue wire the...
  10. alldodge

    Repower

    I installed these originally on the 502 and currently list for $1950 and used with silent choice, can find online cheaper. The manifolds are aluminum and do have a gasket but only to ensure no exhaust gas leak (dry joint). Had to replace the tops with 3-inch higher rise ones when motor was...
  11. alldodge

    Preventative maintenance @ 150 hrs '95 350 mag

    I'm starting to really dislike photbucket, you go look at a pic and they start booming you with adds. I also use it just not much anymore Your serial number is 0F747372, if you out it in your signature along with the drive then it will always be there when you ask a question. You found the...
  12. alldodge

    Alternator low output

    I know you've done it but recheck those connections, the ALT is not working. One of the small wires goes to the purple 12V key ignition circuit. The other small wire is Red/Purple which comes from the starter and passes thru the 50 amp breaker. Also note that you might have a 90 amp fuse on...
  13. alldodge

    Testing your boats fuel system.....

    Something isn't right with the meter going to this, note 18.86V and another time it shows -1xxxx. Voltage should not be above 14.5 volts
  14. alldodge

    Moving a Hydrohoist

    Anyone ever try to move a Hydrohoist boat lift? Have read and can for the most part figure out how to move one, the issue is if anyone has actually or helped someone move the lift. Been looking around and the marina I'm at will only allow hydrohoist, I can find other brands for less and in...
  15. alldodge

    Boat porpoising

    I use this method
  16. alldodge

    Testing your boats fuel system.....

    You have a restriction or leak somewhere. In your first post you said the pump was unable to create a vacuum, this being the case means you have a leak. Need to install a clear line and check for bubbles The lag in many cases is the accelerator pump either does not have the correct stroke or...
  17. alldodge

    Wont Stay Running - MerCruiser 4.3LX (GEN +) (2 BBL.) GM 262 V-6

    I to see it as running out of fuel and the pump is not running once its started. Runs for minute, then just seconds Has the key switch been replaced? The wiring should be that there is 12V on the purple wire going to the OP switch. When starting 12V is supplied to the fuel pump by the...
  18. alldodge

    Audible warning switch location

    There are three switch/senders on your motor. The oil sender to show pressure on the gauge, the fuel pump switch to turn pump off if oil pressure is lost, and the warming horn switch that sounds the horn.
  19. alldodge

    Boat porpoising

    Your motor is to far away from the transom. The motor has about a 15 to 20 degree angle from the transom. Your transom is about straight up and down, if it was tilted back a bit more, your trim out should not be an issue. I don't know how to fix, the reverse hook needs to be there for backing...
  20. alldodge

    Bought boat.......uh....oh....

    Howdy Don't see any way to remove the tank and locker walls without removing the deck, guess its possible but going to be a pain. Since those areas are soft, my guess is the stringers are also. Check the lower section of the transom area with a screw driver down low. If you can push it in...
Top