Search results

  1. Scott Danforth

    Twin 5.0 alphas,2 power steering pumps?

    the pump is a GM Sagninaw pump. you only need to replace the pump ($48 from local parts store) or rebuild same pump as mid 90's GM trucks (different reservoir)
  2. Scott Danforth

    Twin 5.0 alphas,2 power steering pumps?

    Rebuild kit for a saginaw pump is under $15
  3. Scott Danforth

    Sloppy Pivot hole in swing keel Hunter 23.5

    Buy bushings
  4. Scott Danforth

    OMC SSV-177 Glastron 1979

    No, the OMC stringer drive is its own design. The Mercruiser MC drive is a much better product and the are nothing alike other than both have propellers
  5. Scott Danforth

    OMC SSV-177 Glastron 1979

    You should read post 11
  6. Scott Danforth

    '84 Lund 3.0L IO engine runs, locks up, runs, locks up

    Pm me your email
  7. Scott Danforth

    Islander hull corrosion help!!

    I use a 3" cup brush on the end of a 2' drill extension to chew up the foam into foam dust and then suck it up with the shop vac
  8. Scott Danforth

    Surge brake lock-out solution

    bungee chords......... hold many things in place. consider yourself lucky at $300
  9. Scott Danforth

    OMC SSV-177 Glastron 1979

    looking at the pics, the motor needs to come out to access the starter
  10. Scott Danforth

    '84 Lund 3.0L IO engine runs, locks up, runs, locks up

    being a 1984, you should have the 10-spline input shaft and you will need shims to rebuild the gear box (the later ones use crush sleeves)
  11. Scott Danforth

    '84 Lund 3.0L IO engine runs, locks up, runs, locks up

    you can find parts for them. however best to look used on fleabay and CL. new your looking at about $2500 for the transmission if you have a single prop, used to be SAE 30. however I would run SAE 80W-90 synthetic marine gear lube.
  12. Scott Danforth

    Alumacraft Competitor Tiller 2013

    Alumacraft probably doesnt have the information. most of the rigging documentation is done on notebooks. the deck is normally rigged as a complete unit, then flipped and dropped into the hull.
  13. Scott Danforth

    1986 Bayliner Capri 16ft gear cable

    look at the ends of the current cable. they should be hot-stamped with the part number and length every 12"
  14. Scott Danforth

    OMC SSV-177 Glastron 1979

    having owned an OMC when you could get parts (most are no longer available). you couldnt pay me to take one. much less a 1978-1981 hydro-mechanical shift even if the boat was in pristine shape. 99.999995% chance the foam, stringers and transom are water logged you have a frankenstein motor -...
  15. Scott Danforth

    volvo penta aq170a

    look up your parts at volvopentastore.com most likely it overheated from either the raw water fitting on the drive is corroded, or the impeller was neglected.
  16. Scott Danforth

    I am trying to find out the weight of a 21 Ft. 1994 sun tracker trailer vin 4tm12cj1xsb001573 to register it. I can't find the specifications for it.

    if you need the weight of the trailer to register it in various states you have 2 choices call tracker marine with the VIN and get an official letter mailed to you stating the weight of that particular trailer VIN (may take a few days) take your empty trailer to a certified scale and get a...
  17. Scott Danforth

    Cut Holes for Improving Engine Access

    bet its only 2-3 screws to take that bulkhead out of there
  18. Scott Danforth

    '84 Lund 3.0L IO engine runs, locks up, runs, locks up

    I would pull the drive for winter so you can go thru it. the transmission on the AQ drives is at the top. if you ran it dry, you probably did some damage to the bearings and the gears. those drives take just shy of 3 quarts of fluid
  19. Scott Danforth

    OMC SSV-177 Glastron 1979

    1978-1981 OMC stringer 800 with a GM 305 or 350 with newer 1986 or later valve covers and heads OMC (Obsolete Marine Company) never made a coupler for a stringer drive for a one-piece RMS engine (1986 and later) so either the motor doesnt run because it doesnt have a coupler, or someone...
  20. Scott Danforth

    Merc 1974 9.8hp 110

    I would service the quick connect and replace the o-rings
View older results
Top