Search results

  1. R

    1060 Evinrude fisherman 5.5hp

    These PRESSURE operated pumps are very reliable.----Many are replaced needlessly because trouble shooting seems to be a big mystery.
  2. R

    6 Gallon OMC Metal Fuel Tank

    Those metal tanks are the best in my opinion.-----I would fix that one way or the other.----No plastic ( aka JUNK ) tanks for me.
  3. R

    Engine failure?

    First boat for you ?----Gears turn even in neutral.------A very simple inspection for you !!
  4. R

    Engine failure?

    Check the gear oil in the outdrive.
  5. R

    1971 18HP Evinrude Fastwin

    No.----Do not put too much faith in some dummy tube videos.
  6. R

    1959 johnson 50 super seahorse

    Bearings and gears are very , very robust compared to a " modern " 50 HP motor.
  7. R

    87 johnson 30 throttle help

    As always I say----Should be easy.
  8. R

    6 Gallon OMC Metal Fuel Tank

    Those metal tanks are the best.----I would fix it.------If pick up tube is damaged can you slide a piece of hose over it to repair the damage ??
  9. R

    80s 40hp Mariner - Water pump won’t pump

    When testing the water must be 6" ( 15 cm ) above the impeller.
  10. R

    Motor wont start....help please

    The neutral switch has to with electric start motor.---Not spark.----So does spark jump a gap of 1/4" or more ?---I say you have weak spark.---Or the high speed orifice plug inside the carburetor bowl is plugged.
  11. R

    1959 johnson 50 super seahorse

    Those motors are unbelievably thirsty / exhaust is very smelly too.-----Yes they are a smooth runner but not really for every day use.
  12. R

    Classic 50 Lower Unit Seal and impeller replacement

    Is there a special Lock washer in there with a locking tab that needs to be bent out of the way.
  13. R

    Johnson 150 Rebuild/Remanufacture Guidance

    I chamfer / break the outside edges of sealing rings.-----The sharp edge on them interference with movement as block changes temperature.
  14. R

    96 Johnson 225 zero compression upper right cylinder

    The heads will be warped ( they all are ) , refinish them before installing.
  15. R

    Lower Unit Grinding noise

    Drain the gear oil now.----See if there are chunks in there.
  16. R

    96 Johnson 225 zero compression upper right cylinder

    Blown head gasket or major cylinder issues.----You have no choice.---Cylinder head must be removed for a look see.
  17. R

    Mariner 175 V6

    My best guess is a 1987 model.-----A Mercury dealer would order parts using that serial #
  18. R

    1985/ 75.0 Johnson..Shifting Gear Replacement ??

    I think I will step aside this is making no sense at all.
  19. R

    Helicoil issues

    Helicoils are OK---But if someone is taking the plugs out twice a week for some reason then the bets are off.
  20. R

    1985/ 75.0 Johnson..Shifting Gear Replacement ??

    Most confusing still.----The shift cable has nothing to do with steering.-----So one step at a time for you.---Disconnect the steering linkage.---Will the motor turn , yes or no ?----And the lower unit has nothing to do with steering either.----Please make your post clear and less confusing.
Top