Search results

  1. Scott Danforth

    Red Tide

    Ellenton, same frontage road as Woodys River Roo, just about 1/2 mile West on the other side of 75. was built about a year or so ago.
  2. Scott Danforth

    Draining The Oil On My 470?

    its fixed because the tube is the whole dipstick tube, and the threaded portion is brazed on about 3/4" down from the end so the traditional dipstick handle works. I used to use a 1/2hp fluid transfer pump with a hose between the pump and the dipstick. the end of the hose was large enough to...
  3. Scott Danforth

    U-joint seized into gimbal bearing

    The chain and tree are looking better and better compared to cutting the shaft....lol
  4. Scott Danforth

    Draining The Oil On My 470?

    Many dip stick tubes have a bit of the tube above the threads Many oil extractors fit over the tube, some do not. Find a different extractor
  5. Scott Danforth

    Waterlogged keel

    Two methods to dry out that wood: Method #1 a funeral pyre. Use napalm to make sure the fire is hot enough Method #2 build a cradle, pull the deck and pull everything out of the hull. Then cut out all the rotten and wet wood, and do a proper restoration
  6. Scott Danforth

    Draining The Oil On My 470?

    Changing oil is a start of all the maintenance. Pull the drive, check alignment, gimbal and bellows. Change the impeller
  7. Scott Danforth

    Which resin to finish floor?

    You started with epoxy, you should finish with epoxy. Epoxy sticks to poly Epoxy sticks to eooxy Poly sticks to poly Poly does not stick to epoxy
  8. Scott Danforth

    Boat keeps porpoising.

    No....No....No
  9. Scott Danforth

    Alpha 1 Gen 2 Weak Link

    there are some kryo gear sets on the market. the rest is custom work.
  10. Scott Danforth

    Alpha 1 Gen 2 Weak Link

    in the case of RLP performance. it was because he wanted to because if you want performance to hit 100mph in a 21 foot boat, you want a shorter X dimension (less drag) and a custom foot (less drag) and a stand-off box (better bite). not just a bigger/heavier drive like switching to a Bravo...
  11. Scott Danforth

    Alpha 1 Gen 2 Weak Link

    I know people with 383's putting 400-450hp into Alpha drives and doing is "successfully" in early 90's sausage boats on the great lakes. they are using kryo treated gears, however they have to watch the hole shot and use a rev limiter. successfully is also in quote, because one boat is on...
  12. Scott Danforth

    Red Tide

    First date with the Admiral was at the River Roo Whiskey D's (other side of 75) has better food and better service. water is a bit skinny by boat. Cortez Kitchen and Swordfish Grill on the ICW are also good Sea Hut on 19 has great lakes perch. (cant eat outside in the summer due to the...
  13. Scott Danforth

    U-joint seized into gimbal bearing

    someone skipped the annual PM (Preventative Maintenance) two methods: try to hammer it inward a bit to break loose the rust. hook a chain on to the u-joint and a local tree and yank it out (or a hydraulic ram and pull it out). then fix what is broken (gimbal bearing, housing, etc.) soak it...
  14. Scott Danforth

    Boat keeps porpoising.

    the trim setting is dynamic and controlled by the operator depending on what the boat needs based on speed, load, condition, wind, etc. there is no set it and forget it. Ron Popiel did not invent the trim. if people sit in the back, more down. if people sit in the front, more up. that...
  15. Scott Danforth

    Bottom Painting for a Trailered Boat

    click on the report button on the bottom of your post. type them a note
  16. Scott Danforth

    3.7 470 amazing

    The motor needed a closed deck, alloy head, roller cam, adjustable valve train, and a real damper. Because of the large bore, a balance shaft would help
  17. Scott Danforth

    3.7 470 amazing

    If you maintain it, it can last
  18. Scott Danforth

    Alpha 1 Gen 2 Weak Link

    Weak links: Dog clutch Lower gear set Upper gear set Drive shaft diameter Then on RPM, the oiling system
  19. Scott Danforth

    Trim Bonding Cable

    best advice ever. then post the pictures in your iboats thread so when your phone has a melt down (and you did not back up the data), you can at least come here and look at your own pictures.
  20. Scott Danforth

    350 mercruiser stalling when shifted into gear

    have you tried to adjust the lower shift cable and the shift interrupt switch? start there. if you cant adjust it out, buy a new lower shift cable.
Top